This is information on a product in full production.
March 2014 DocID16923 Rev 3 1/11
ESDAXLC6-1MY2
Extra low capacitance
single line transient voltage surge suppressor (TVS)
Datasheet
-
production da ta
Figure 1. Functional diagram
Features
• Extra low capacitance 0.6 pF max on a wide
fr
equency spectrum (200 MHz - 3000 MHz)
• Unidirecti on al dev ice
• Low clamping factor V
CL
/V
BR
• Fast response time
• Very thin package: 0.50 mm max
• Low leakage current
• High ESD protection level
• High integration
• Suitable for high density boards
Complies with the following standards
• IEC 61000-4-2 level 4
• MIL STD 883G-Method 3015-7: class 3B
Applications
Where transient over voltage protection and
electrical overstress protection in sensitive
equipment is required, such as:
• Computers
• Printers
• Commun ic ation sy st ems
• Cellular phone handsets and accessories
• Video equipment Portable equipment
Description
The ESDAXLC6-1MY2 is a single line Transil™
diode designed specifically for the protection of
integrated circuits in portable equipment and
miniaturized electronics devices subject to ESD
transient over voltages. Packaged in µQFN-2L, it
minimizes PCB consumption.
TM: Transil is a trademark of STMicroelectronics
µQFN-2L
I/01
I/02
GND
www.st.com
Characteristics ESDAXLC6-1MY2
2/11 Do cID16923 Rev 3
1 Characteristics
Figure 2. Electrical characteristics (definitions)
Table 1. Absolute maximum ratings (T
amb
= 25 °C)
Symbol Parameter Value Unit
V
PP
Peak pulse voltage:
IEC 61000-4-2, level 4: contact discharge 8
kV
P
PP
Peak pulse power dissipation (8/20 µs)
(1)
T
j init i al
= T
amb
12 W
I
PP
Peak pulse current typical value (8/20 µs) 2.8 A
T
op
Operating junction temperature range - 40 to + 125 °C
T
stg
Storage temperature range - 55 to +150 °C
1. For a surge greater than the maximum values, the diode will fail in short-circuit
I
V
I
RM
I
R
V
RM
V
BR
Symbol Parameter
V = Breakdown voltage
I = Leakage current @ V
V = Stand-off voltage
I = Breakdown current
BR
RM RM
RM
R
Table 2. Electrical characteristics (values, T
amb
= 25 °C)
Symbol Test condition Min. Typ. Max. Unit
V
BR
I
R
= 1 mA 6 - - V
I
RM
V
RM
= 3 V
--100nA
C
line
V
R
= 0 V, F = (200 MHz - 3000 MHz), V
osc
= 30 mV - - 0.6 pF