Doc. No.
FPC-A0162-427
Page No.
1/14
Date Issued
2015-04-06
Prepared by
Josephine
XKB Connectivity
Date revised
2018-11-23
checked by
Jay
Product Specification
Rev. No.
427
Approved by
Mei Chen
Title：1.0mm FFC/FPC Pull-down connection (H=2.5mm)
1. SCOPE（适用范围）
This specification covers the performance, tests and quality requirements for the 1.0mm FFC/FPC Pull-down
connection (H=2.5mm).(本规范涵盖了1.0mm FFC/FPC Pull-down connection (H=2.5mm)
的性能、测试和质量要求。)
2. PRODUCT DESCRIPTION（ 产品描述）
DESCRIPTION（描述）
Part Number（料号）
FPC连接器 1.0MM 抽拉式 H=2.5MM 下接 32P 镀锡
X10B25L32T
3. APPLICABLE DOCUMENT （适用文件）
The following documents form a part of this specification to the extent specified herein. In the event of
conflict between the requirements of this specification and the product drawing, the product drawing
shall take precedence. In the event of conflict between the requirements of this specification and the
referenced documents, this specification shall take
precedence.（下列文件构成本规范的一部分，在此规定的范围内。本规范要求与产品图纸有冲突
时，以产品图纸为准。如果本规范的要求与参考文件发生冲突，应以本规范为准。）
EIA-364（电子连接器及接插件测试程序）
UL STD-94（关于塑胶材料设备零配件及器��阻燃性测试规范）
4. REQUIREMENTS （要求）
4.1. Design and Structure （设计和结构）
Product shall be of the design, structure and physical dimensions specified on the applicable product
drawing.（产品的设计、结构和物理尺寸参考所适用的产品图纸）
PIN Position（PIN 位）: See drawing （详见产品图纸）
Contact（接触类型）: Double sides contact （双面接触）
TML Soldering（端子形状）: SMT（SMT 型）
PCB Thickness（适合 FPC 厚）: T=0.3±0.02mm
Coplanarity （焊锡共面度）: 0.10mm MAX.
4.2. Materials/ Finish (材料/表面处理)
Materials used in the structure of product shall be as specified on the applicable product drawing.
(产品结构中使用的材料参考所适用的产品图纸)
Housing（主体）: LCP Nature Color（本色）UL 94V-0
Doc. No.
FPC-A0162-427
Page No.
2/14
Date Issued
2015-04-06
Prepared by
Josephine
XKB Connectivity
Date revised
2018-11-23
checked by
Jay
Product Specification
Rev. No.
427
Approved by
Mei Chen
Title：1.0mm FFC/FPC Pull-down connection (H=2.5mm)
Cover（锁扣）: LCP Black（黑色）UL 94V-0
Terminal（端子）: Phosphor Bronze（磷铜）
Stator（定位片）: Bronze（黄铜）
4.3. Ratings （额定功率）
Item（项目）
Standard（标准）
Rated Voltage (Maximum)额定电压
50V
Rated Current (Maximum)额定电流
0.5A
AC/DC
Operating temperature range工作温度范围
-40℃～+85℃
From -40 to +85 degree centigrade
Storage Temperature Range储存温度范围
-40℃～+85℃
From -40 to +85 degree centigrade
5. TEST STANDARD （测试标准）
Unless otherwise specified, the standard range of atmospheric conditions for making
measurements and tests are as follows （除另有说明外，用以进行测量和测试的标准环境
条件范围如下）
5.1 Ambient temperature（环境温度）: 5℃ to 35℃
5.2 Relative humidity （相对湿度）: 45% to 85%
5.3 Air pressure （气压）: 86Kpa to 106Kpa
6. HOWEVER, IF DOUBTS ARISE CONCERNING JUDGMENTS. PERFORM UNDER THE
FOLLOWING STANDARD
CONDITIONS.（但是，如果对判决产生疑问，按照下列标准条件执行）
Temperature（温度）：23±1℃.
Humidity（湿度）：50%±2% RH.
Air Pressure（气压）：86~106kPa