Quick Start Guide
EV Power Inverter Control
Reference Platform
100 kW Class power inverter design kit for ASIL-D
functional safety compliance
Quick Start Guide
Getting to know the Development
boards
The NXP EV Power Inverter Control
Reference Platform provides a hardware
reference design, system enablement
software, and functional safety enablement
to develop a complete ASIL-D compliant
high voltage, high power traction motor
inverter for electric vehicles.
The Reference Platform has been
designed into an evaluation prototype
demonstrating 196 kW peak output power
and > 96 % electrical efficiency operating
from 320 V supply voltage. It is designed to
interface to a Fuji M653 IGBT module rated
for 800 A / 750 V operation (purchased
separately from Fuji Electronics).
Cautions
Be aware that HV can be dangerous and
should not be applied until proper shielding
is installed. Make sure all high voltage
connections are secured and the operator is
properly protected from any shock hazard. A
failsafe inverter kill switch should always be
programmed.
Kit contents
MCU control board
(EV-CONTROLEVM)
Driver control board
(EV-POWEREVB)
Sensor board
(EV-SENSOREVB)
Interface Board
(EV-INTERFACEVB)
PCB Interconnect
cables
(EV-HW-INVERTER)
Vehicle
interface cable
Driver
signals cable
3-phase
currents cable