Ka-Band
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifi cations may change without notice as a result of additional data or product refi nement.
Please contact CPI before using this information for system design.
MKT 102, ISSUE 5 04/11 PDF
Certificate Number: 30515
Electrical (continued)
Intermodulation -24 dBc max. with two equal
carriers at total output power
7 dB OBO
Group Delay (in any 20 MHz band)
Linear 0.1 ns/MHz max.
Parabolic 0.02 ns/MHz sq. max.
Ripple 2.0 ns pk-pk max.
Primary Power 180-264 VAC, 47-63 Hz
Power Consumption 2.5 kVA, typ.
2.9 kVA, max.
Power Factor 0.95 min.
Environmental (Operating)
Ambient Temperature -4
0°C to +55°C operating,
-40°C to +75°C non-operating
Relative Humidity
100% condensing
Altitude 10,000 ft. with standard adiabatic
derating of 2°C/1000 ft., operating;
50,000 ft., non-operating
Shock 20 g pk, 11 msec, 1/2 sine pulse
Vibration 2.1 grms; 5-500 Hz
Acoustic Noise 65 dBA @ 3 ft. from amplifi er
Heat Dissipation 2300 watts, max.
Mechanical
Cooling (TWT) Forced air with integral blower
RF Input and Output UG-1530/U grooved waved
fl ange (WR-34 wavegude);
WR-28 fl ange/waveguide optional
RF Output Monitor 2.9 mm coax, female
Dimensions (W x H x D) 12.0" x 17.0" x 29.36"
(305 x 432 x 746 mm)
Weight 111 lbs with no options (50.0 kg)
SPECIFICATIONS, VZA-6903E
Electrical
Frequency Custom frequency ranges with the
27.0 to 31.0 GHz frequency band
Bandwidth* 100 to 550 MHz instantaneous
Output Power*
Klystron 750 W min. at 300 MHz bandwidth;
600 W min. at 500 MHz bandwidth
Amplifi er 600 W min. at 300 MHz bandwidth;
475 W min. at 500 MHz bandwidth
Gain
75 dB min. at rated power;
80 dB min. at small signal
RF Level Adjust 0 to 20 dB typ. (30 dB optional)
Gain Stability ±0.25 dB/24hr max. after 30 min. warmup
(at constant drive and temp.)
Small Signal Gain Slope ±0.05 dB/MHz max.
Small Signal Gain Variation
pk-pk over any 40 MHz, max. 1.0 dB at 300 MHz bandwidth;
1.5 dB at 500 MHz bandwidth
over entire passband, max. 1.5 dB at 300 MHz bandwidth;
5.0 dB at 500 MHz bandwidth
Attenuator Step Resolution ±1.0 dB
Input VSWR 1.3:1 max.
Output VSWR 1.3:1 max.
Load VSWR 2.0 max. operational; any value for operation
without damage
Residual AM -50 dBc below 10 kHz
-20 [1.5 +log F (kHz)] dBc,
10 kHz to 500 kHz
-85 dBc above 500 kHz
Phase Noise
Single Carrier 10 dB below IESS 308 mask
AC fundamentals related -36 dBc
Sum of Spurs -47 dBc (370 Hz to 1 MHz)
AM/PM Conversion 1.0°/dB max. for a single carrier at
7 dB below rated power
Harmonic Output -30 dBc at rated power, second and third
harmonics
Noise and Spurious < -65 dBW/4 kHz in passband
(at rated gain) <-150 dBc below 21 GHz
OPTIONS:
• Remote Control Panel
• Integrated Linearizer
• Integrated 1:1 Switch
Control and Drive
• Redundant and Power
Combined Subsystems
• Ethernet Interface
*This amplifi er is factory adjustable for bandwidth and output power. For instance, it can provide 475 W at the
fl ange over 500 MHz, or 600 W at the fl ange over 300 MHz, and other combinations of power and bandwidth
are available. It does NOT have fi eld-adjustable frequency range.