GLASS PASSIVATED
SURFACE MOUNT BRIDGE RECTIFIER
REVERSE VOLTAGE – 1000 Volts
FORWARD CURRENT – 2 Amperes
FEATURES
• Ideal for printed circuit board
• Reliable construction utilizing molded
plastic technique
MECHANICAL DATA
• Case Material: “Green” molding compound, UL
flammability classification 94V-0,(No Br. Sb. CI.)
“Halogen-free”
• UL recognized file # E364304
• Polarity indicator: As marked on the body
• Weight: 98 mg (Approximate)
• Marking Code: ABS20M
All dimension in
millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
ABSOLUTE RATINGS
Maximum repetitive peak reverse voltage
Maximum DC blocking voltage
Average rectified output current per device
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
@ T
A
=25°C
@ T
A
=125°C (Note 1)
Peak forward surge current 1ms single half
sine-wave superimposed on rated load
@ T
A
=25°C
@ T
A
=125°C (Note 1)
I
2
t rating for fusing (t = 8.3ms)
Operating and storage temperature range
STATIC ELECTRICAL CHARACTERISTICS
T
A
= 25°C
T
A
= 125°C (Note1)
Typical junction capacitance (Note 2)
Typical thermal resistance (Note 3)
Note :
(1) Perform static test after the temperature of oven is steady 20 minutes.
(2) Measured at 1.0MHz and applied reverse voltage of 4.0V DC
(3) Thermal resistance junction to case, lead and ambient in accordance with JESD-51.
Unit mounted on 1oz/ft
2
30mm *30mm copper pad per pin.