MSx EM BMC1
www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 08/2014
Order No.
1) Cable length in meters (xxx = length in m; e.g. 10 m = 010)
BMC1 BUS communication - PROFINET IO 8.BMC1.000
Connection technology Order No.
Accessory Order No.
T-bus connector to connect basic and expansion modulesRJ45
05.TBMS.000
to connect several basic modules
05.TBFM.000
Unprepared cable
Ethernet cable
05.00.6031.1111.XXXM
1)
Connector, self-assembly
RJ45 connector straight, IP20
05.VS-08-RJ45-5-Q/IP20
Further accessories can be found in accessories area of our website at: www.kuebler.com/accessories.
Additional connectors can be found in the connection technology section or in the connection technology area of our website at: www.kuebler.com/connection_technology.
You will find an overview of our systems and components for Functional Safety under www.kuebler.com/safety.
Safety Modules
PROFINET IO
Safety-M
Bus module
Communication module –
BMC1
Basic module
Modular safety control
system.
Expansion modules
For additional
inputs and outputs.
Bus modules
For standard field bus /
Ethernet interface.
Modular construction
• The binary or analogue input or output data, configured for
each module by a safe PLC, are transmitted from and to the
non-safe control via field bus.
• This connection allows for coordination of the non-safe and
of the safe sections of the global system thanks to easily
configurable functions.
• The communication modules BM are to be parameterised as
slave elements.
• The communication modules permit 4 basic modules to be
connected to a field bus communication module via a common
backplane.
PROFINET IO
GSDML files are available on the Safety-M software CD and
online on our homepage.
The PROFINET baud rate is 100 Mbit/s in full-duplex mode.
The BM communication modules ensure data exchange between
the Safety-M basic modules and non-safe controls. It is for
example possible to send error and operating messages.
In addition, they allow transmitting process and logic data such
as the current position and/or speed, as well as the status of the
inputs and outputs.
The communication modules are operated together with a
basic module on a common backplane bus and thus take on the
functionality of a gateway to the corresponding field bus.