eGaN® FET DATASHEET
EPC2070
EPC POWER CONVERSION TECHNOLOGY LEADER | EPC-CO.COM | ©2021 | | 1
Gallium Nitride’s exceptionally high electron mobility and low temperature coecient allows very
low R
DS(on)
, while its lateral device structure and majority carrier diode provide exceptionally low Q
G
and zero Q
RR
. The end result is a device that can handle tasks where very high switching frequency,
and low on-time are benecial as well as those where on-state losses dominate.
EPC2070 eGaN® FETs are supplied in
passivated die form with copper pillars.
Die size: 1.3 x 0.85 mm
Applications
• High Frequency DC-DC from 48 V–60 V input
• ToF module using Vcsel laser for camera
modules, laptops and smart phones
• Open Rack Server Architectures
• Lidar/Pulsed Power Applications
• Power Supplies
• Class D Audio
• LED Lighting
• Low Inductance Motor Drive
Benets
• Ultra High Eciency
• No Reverse Recovery
• Ultra Low Q
G
• Ultra Small Footprint
EFFICIENT POWER CONVERSION
HAL
EPC2070 – Enhancement Mode Power Transistor
V
DS
, 100 V
Max R
DS(on)
, 23 mΩ
I
D
, 1.7 A
G
D
Maximum Ratings
PARAMETER VALUE UNIT
V
DS
Drain-to-Source Voltage (Continuous) 100
V
Drain-to-Source Voltage (up to 10,000 5 ms pulses at 150°C) 120
I
D
Continuous (T
A
= 25°C) 1.7
A
Pulsed (25°C, T
PULSE
= 300 µs) 34
V
GS
Gate-to-Source Voltage 6
V
Gate-to-Source Voltage -4
T
J
Operating Temperature -40 to 150
°C
T
STG
Storage Temperature -40 to 150
Thermal Characteristics
PARAMETER TYP UNIT
R
θJC
Thermal Resistance, Junction-to-Case 3.4
°C/W R
θJB
Thermal Resistance, Junction-to-Board 16
R
θJA
Thermal Resistance, Junction-to-Ambient (Note 1) 92
Note 1: R
θJA
is determined with the device mounted on one square inch of copper pad, single layer 2 oz copper on FR4 board.
See https://epc-co.com/epc/documents/product-training/Appnote_Thermal_Performance_of_eGaN_FETs.pdf for details.
# Dened by design. Not subject to production test.
Static Characteristics (T
J
= 25°C unless otherwise stated)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
BV
DSS
Drain-to-Source Voltage V
GS
= 0 V, I
D
= 0.11 mA 100 V
I
DSS
Drain-Source Leakage V
GS
= 0 V, V
DS
= 80 V 0.0001 0.1
mA
I
GSS
Gate-to-Source Forward Leakage V
GS
= 5 V 0.004 0.2
Gate-to-Source Forward Leakage
#
V
GS
= 5 V, T
J
= 125°C 0.1 1
Gate-to-Source Reverse Leakage V
GS
= -4 V 0.001 0.1
V
GS(TH)
Gate Threshold Voltage V
DS
= V
GS
, I
D
= 1.5 mA 0.8 1.3 2.5 V
R
DS(on)
Drain-Source On Resistance V
GS
= 5 V, I
D
= 3 A 18 23 mΩ
V
SD
Source-Drain Forward Voltage I
S
= 0.5 A, V
GS
= 0 V 1.6 V