V11
1
︳
LDM100S SERIES
100 WATT SINGLE OUTPUT
AC-DC
LED DRIVER
Features
*
Universal Input 90~305VAC or 127-420Vdc
* High Efficiency up to 90%
* Meets EN55015, EN61000-3-2 Class C
* Meets EN61347-1, EN61347-2-13
* Meets UL8750
* Active PFC Function
* IP67 Design for Indoor or Outdoor
Installations
(note7)
* Max. Output power 100W
* Dimming function: 1~10Vdc and Resistance
or DALI (Optional)
* Protections: Short circuit, Over Current
Over Voltage and Over Temperature
* Constant Voltage and Constant Current
* No Load Power Consumption<0.5W
(note10)
* 3 Years Warranty
LDM100 Series
Ordering information
Model No.
Optional type
LDM100SXXX -XX
Optional type:
01: Constant Current Mode (IP67) 03A: Constant Current Mode (IP65)
No dimming Dimming:1~10Vdc and Resistance
No adjustment for output voltage and output current With adjustment for output voltage and output current
02: Constant Current Mode (IP65) 04: Constant Current Mode (IP67)
No dimming Dimming: DALI
With adjustment for output voltage and output current
No adjustment for output voltage and output current
03: Constant Current Mode (IP67) 04A: Constant Current Mode (IP65)
Dimming: 1~10Vdc and Resistance Dimming: DALI
No adjustment for output voltage and output current With adjustment for output voltage and output current
Specifications are subject to change without notice
MODEL
Output
Voltage
Output
Current
Note.6
Ripple
(mV p-p)
Note.1
Voltage
Accuracy
Note.2
Line
Regulation
Note.3
Load
Regulation
Note.4
Constant
Current
Region
Current
Adj. Rang
(Optional)
Note.5
Voltage
Adj. Rang
(Optional)
Note.5
% EFF.
(typ.)
Note.8
LDM100S120
12V 8.34A 120mV
±1% ±1% ±2% 6.5V~12V
5.3A~8.34A
10.8V~13.2V
88%
LDM100S240
24V 4.17A 120mV
±1% ±1% ±2% 13V~24V
2.6A~4.17A
21.6V~26.4V
89%
LDM100S360
36V 2.78A 120mV
±1% ±1% ±2% 19V~36V
1.74A~2.78A
32.4V~39.6V
90%
LDM100S480
48V 2.08A 120mV
±1% ±1% ±2% 26V~48V
1.3A~2.08A
43.2V~52.8V
90%
V11
2
Specifications
INPUT SPECIFICATIONS:
Voltage …....………........…................................ 90~305Vac or 127-420Vdc
Frequency ……………………………………….........…………..... 47 to 63Hz
Inrush Current …….....................… 75A max. @240Vac, Cold Start @25℃
Conducted EMI ……………………………..……....… CISPR/FCC Class B
Power Factor …………………………………….….……………...... PF> = 0.9
Leakage Current ………………...…………..…..… 0.75mA max. @277Vac
Input Current ……………………………….. 1.1A typ. @110Vac, Pout=99W
0.55A typ. @230Vac, Pout=99W
OUTPUT SPECIFICATIONS:
Holdup Time ……...……………………………………… 16ms typ. @115Vac
Short Circuit Protection ………………..……... Hiccup Mode (Auto Recover)
Temperature Coefficient .……………….….................................. ±0.05%/
℃
1~10V Dimming function for output current curve:
0
10
20
30
40
50
60
70
80
90
100
0 1 2 3 4 5 6 7 8 9 10
DIM(V)<1V,the output will be shut down
Output current(%)
Typical curve
Over Voltage Protection ………………………….
TVS Component to Clamp
Over current Limit ………..…….………….. constant current mode (note 9)
Over Temperature Protection…………....………...………….……..110
℃
typ
Altitude ……………………..……………..…………………………… 2000m
Startup time (note11) ………………………..………………………. 0.5s
max.
Rise time……………………………………..…………………………50ms typ.
MTBF….….…....…. MIL-HDBK-217F, GB, at 25
℃
/115VAC…160Khrs typ.
Life Time ………………………..……… 40000 hours min. @full load, 25
℃
Vibration ….….… 15~2000Hz 4G period for 60min, each along X Y Z axes
SAFETY AND EMC:
Emission and Immunity ……..….…………………….… EN55015, CISPR22
EN61547, EN61000-3-2, EN61000-3-3
Derating curve:
0
25
50
75
100
-40 -30 -20 -10 0 10 20 30 40 50 60 70
Ambient Temperature(
o
C)
Rated Load(%)
20LFM(Natural Convection)
Isolation Voltage …………………….……..…………….. I/P-O/P 3750VAC
NOTE:
Surge ……………………………….……………………...………………. 4KV
1.
Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
Safety……………………………….……UL8750, EN61347-1,EN61347-2-13
ripple noise measuring @20MHz BW and 95% rated current.
Harmonic Current …………………….. EN61000-3-2 Class C (>60% load)
2. Voltage accuracy is set of 90% rated current.
Isolation Resistance ………………………….…..……………... 100MΩ min.
3.
Line regulation is measured from high line to low line with 90% rated current.
GENERAL SPECIFICATIONS:
4. Load regulation is measured from 90% to 10% rated current.
Operating Temperature ............................. -40 ~ 70 (see Derating Curve)℃
5. Can be adjusted by internal potentiometer.
Storage Temperature ………………………...……..........……........ -40~85℃
6. Output constant current accuracy ±5%.
Cooling …………………………………………….…….. Natural Convection
7. IP67f or model: LDM100SXXX-01, LDM100SXXX-03, LDM100SXXX-04
MECHANICAL CHARACTERISTICS:
IP65 for model: LDM100sXXX-02, LDM100SXXX-03A, LDM100SXXX-04A
Dimensions ……….... 9.134x1.575x1.102nches (232.00x40.00x28.00mm)
8. Efficiency is measured 95% rated power at Vin=230VAC.
Weight ………………………………….......……………………….. 504g typ.
9. Less than 50% typ. of the rated output voltage will enter hiccup mode.
10. No load power consumption<0.5W for LDM100SXXX-01, -02
No load power consumption<1.5W for LDM100SXXX-03, -03A, -04, -04A
Stand by power consumption<0.5W for LDM100SXXX-03, -03A, -04, -04A
11. Start up interval must be greater than 3 seconds.
Mechanical Specification
ACL(Brown)
ACN(Blue)
FG (Green/Yellow)
All Dimensions in Inches(mm)
Tolerance Inches:x.xxx±0.02
Millimeters:x.xx±0.5
2
Vo+(Red) 16AWG
Vo-(Black) 16AWG
SJTW
SJTW 18AWG(0.75mm )x3C
TC
＊
TC: Max Case Temperature
Typical at 25˚C, nominal line and 75% load, unless otherwise Specified