V14

︳

CFM150M SERIES

150W MEDICAL AND ITE OPEN FRAME

AC-DC MODULES

WITH PFC

Features

* Universal Input Range 90 ~ 264VAC

* Medical and ITE Safeties

* 3”x 5” Compact Size

* Less than 1 U high

：

1.05”

* Industry Standard Pin Out

* Active PFC Meets EN61000-3-2

* High Efficiency up to 93%

* Meets CISPR/FCC Class B

* Remote Voltage Sense

* Over Voltage Protection

* Continuous Short Circuit Protection

* No load Power Consumption<0.5W

* Meets 2MOPP

Specifications are subject to change without notice.

MODEL

OUTPUT

VOLTAGE

MAX.

LOAD

MIN.

LOAD

RIPPLE &

NOISE

NOTE 1

VOLTAGE

ACCURACY

NOTE 2

LINE

REGULATION

NOTE 3

LOAD

REGULATION

NOTE 4

% EFF.

(Typ.)

NOTE 5

CFM150M120

12 V 12.5 A

0A 1% ±1% ±0.5% ±1% 90%

CFM150M240

24 V 6.25 A

0A 1% ±1% ±0.5% ±1% 92%

CFM150M360

36 V 4.17 A

0A 1% ±1% ±0.5% ±1% 92%

CFM150M480

48 V 3.13 A

0A 1% ±1% ±0.5% ±1% 93%

V14

Specifications

CFM150M Series Derating Curve

INPUT SPECIFICATIONS:

Voltage …....………........…........................................... 90~264Vac

Frequency ………………………………………….……………..... 47 to 63Hz

Inrush Current ………………….……………................. 110A max. @240Vac

Leakage Current ………………………………………….…...…… 300uA max.

OUTPUT SPECIFICATIONS:

Hold-up Time ………………………………………………………... 16ms typ.

Short Circuit Protection ……….…….………… Hiccup mode(Auto Recovery)

Adjustment Range on Vout ………………………………………………. ±5%

Over Voltage Protection ………………………… Recycle AC input to restart

Temperature Coefficient ……………………..............................… ±0.05%/℃

GENERAL SPECIFICATIONS:

Isolation ………………………………….……… Input to output = 5,656VDC

NOTE:

Operating Temperature .......................... -20

℃

~ 70

℃

(see Derating Curve)

1. Add a 0.1uF ceramic capacitor and 10uF E.L.

Storage Temperature ……………….…………….........……........ -20 ~ 85

℃

capacitor to output for Ripple & Noise measuring @20MHz BW.

Humidity ....................................................... 93% RH max. Non condensing

2. Voltage accuracy is set at 100% rated load and 25

℃

Ta.

Cooling ……………………………………………………. Natural Convection

3. Line regulation is measured from high line to low line with full load.

Switching Frequency ………………………............................ 90KHz Typical.

4. Load regulation is measured from full to 10% load.

MTBF ………….… MIL-HDBK-217F, GB, 25

℃

/115VAC …… 100Khrs min.

5. Typical efficiency at 230VAC and full load at 25

℃

Altitude ……………………..………………...………………………….. 3000m

6. Standard input and output connectors wafer with LONG CHU P3060

Dimensions ………….. 5.000x3.000x1.050inches (127.00x76.20x26.67mm)

series and mate with MOLEX housing 09-50-1031 and 09-50-1081 or

Weight ………………………………………………………... 270g (0.6Pounds)

equivalent.

SAFETY AND EMC:

7. DC output pin 1, 2, 3, 4: Vout (-), DC output pin 5, 6, 7, 8: Vout (+).

Emission and Immunity (Ed. 4.0) …………..… EN55011, EN55032 Class B

FCC CFR 47 Part 15, EN61000-3-2, 3, IEC61000-4-2, 3, 4, 5, 6, 8, 11

Safety (Ed. 3.1) …………………………………. IEC60601-1:2005+A1:2012

IEC60950-1:2005+A1:2009+A2:2013, EN60601-1:2006+A11:2011+A1+A12

EN60950-1:2006+A11+A1+A12:2011+A2:2013, UL ANSI/AAMI ES60601-1:2005, UL60950-1, 2

Editon

CFM150M Series

All Dimensions are in inches[mm]

Tolerances： Inches：x.xxx=±0.02

Millimeters

：x.xx=±0.5

ACL

ACN

RS-

RS+

LED

0.224(5.70)

4.546(115.48)

5.000(127.00)

0.224(5.70)

2.555(64.90)

3.000(76.20)

0.118(3.00)max

0.063(1.60)

1.050(26.67)max

Typical at 25˚C, nominal line and 75% load, unless otherwise Specified

20%

40%

60%

80%

100%

-20 -10 0 10 20 30 40 50 60 70

Ambient Temperature(

Rated Load(%)

20 LFM(Natural C onve cti on)