159

ipf electronic gmbh

�� Kalver Straße 25 - 27 • 58515 Lüdenscheid • Germany

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com

at robust design

4-pin M12-connector for the connecon cable to the

control unit

status displays by LED

system of protecon IP67

simple vibraon-proof connecon of sensor leads

AND / OR logic operaon on locaon

minimized wiring eort

descripon

It is oen the case that the signals of many sensors are linked

in an applicaon in order to provide a statement about an

operaonal state.

If this linkage is adopted in the control unit, it is necessary to

run the signals of each sensor up unl there via leads, and

process them in the control program.

In many cases, it would be sucient to link the sensor signals

to one another on-site and only transmit one linked end-signal

to the control unit.

ipf electronic logic distribuon terminals are used for this

purpose. According to the module, up to 8 sensors can be

connected and logically linked to one another.

AND and OR versions are available as logical variants. The user

can directly see which signals are pending and/or which are

missing (as the case may be) by means of LED status display

of the logic modules. The status of the linked end signals is

similarly shown via output LEDs.

The 2 x 2-way / 2 x 4-way types have two separated signal

outputs. In these types the input signals of the right and le

module halves are linked independent from each other.

If, in the case of an AND module, an input slot cannot be taken

up by a sensor, a so-called “jumper plug“ can be supplied.

applicaon examples

u signal linkage of mulple sensors

design 60 x 122 x 41.5mm

60 x 172 x 41.5mm

logic distributor 1 x 4-way AND / OR

2 x 2-way AND / OR

1 x 8-way AND / OR

2 x 4-way AND / OR

ACCESSORIES

LOGIC MODULES 1700

160

ipf electronic gmbh

• Kalver Straße 25 - 27 • 58515 Lüdenscheid • Germany

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com

TECHNICAL DATA

input pnp, (signal on pin 4) pnp, (signal on pin 4)

output see above see above

operang voltage 10 ... 30V DC 10 ... 30V DC

current consumpon (max. load) 1A 1A

output current (max. load) 200mA per output 200mA per output

insulaon resistance > 10

Ω > 10

display (funcon) operang voltage: 2 x green LED (both on) operang voltage: 1 x green LED

display (signal) 1 x yellow LED per slot 1 x yellow LED per slot

housing material plasc (PBT) plasc (PBT)

contact meterial CuZn, nickel underplang and gold plated CuZn, nickel underplang and gold plated

plug-in and pull-out power ≥ 0.5N plug-in and pull-out power ≥ 0.5N

design 60x122x41.5mm 60x172x41.5mm

operang temperature -20 ... +70°C -20 ... +70°C

plug-in cycles ≥ 50 ≥ 50

soiling degree 3 3

inammability class UL 94 V-0 UL 94 V-0

system of protecon (EN 60529) IP67 - only when screwed with the IP67 - only when screwed with the

corresponding counterparts or blank plugs corresponding counterparts or blank plugs

connecon module: M12-connector, 4-pin module: M12-connector, 4-pin

connecon accessories cable socket, e.g. VK500325, 5m, PUR, straight cable socket, e.g. VK500325, 5m, PUR, straight

connecon sensors: 4 x M12-socket, 4-pin sensors: 8 x M12-socket, 4-pin

connecon accessories connecon cable, e.g. VK200F25, 2m, PUR, straight connecon cable, e.g. VK200F25, 2m, PUR, straight

arcle-no. VL600104 VL600108

output AND-linked, 4-way AND-linked, 8-way

arcle-no. VL600114 VL600118

output AND-linked, 2 x 2-way AND-linked, 2 x 4-way

arcle-no. VL600124 VL600128

output OR-linked, 4-way OR-linked, 8-way

arcle-no. VL600134 VL600138

output OR-linked, 2 x 2-way OR-linked, 2 x 4-way

ACCESSORIES

1700 LOGIC MODULES