353
Level Transmitters,
Submersible
LEVEL
MINIATURE SUBMERSIBLE LEVEL TRANSMITTER
Only 0.63˝ (16 mm) in Diameter, Perfect for Wells and Boreholes, Up to ±0.10% Accuracy, Low Power Models for Telemetry Systems
[158.30]
Ø5/8
[Ø15.87]
CABLE
BREATHER
SPECIFICATIONS
Service: Compatible liquids.
Wetted Materials: Body and nose: 316
SS; Cable: Polyether polyurethane or
ETFE; Seals: Fluoroelastomer; Label:
Polyolen.
Accuracy: ±0.25% or ±0.10% FS**.
Temperature Limits: -4 to 176°F (-20
to 80°C).
Compensated Temperature Limits:
0.25%: (0 to 70°C); 0.10%: (0 to 60°C).
Thermal Effect: 0.25%: ±0.45% FS
TEB; 0.10%: ±0.30% FS TEB.
Pressure Limit: 2x FS.
Power Requirements: Current output:
10 to 33 VDC; Voltage output: 8 to 33
VDC; 5 mA max (no load).
Output Signal: 4 to 20 mA DC 2-wire or
0 to 5 V* (model depending).
Response Time: < 50 ms.
Max Loop Resistance: 1000 Ω @ 30
VDC (current output).
Voltage Output Impedence: 10 Ω + 4.4
Ω / 100´ cable (voltage output).
Electrical Connections: Wire pigtail.
Mounting Connection: Suspended
below point being monitored.
Electrical Protection: Surge/lightning
protected per EN61000-4-5, Class 5.
Weight: Body: 0.235 lb (0.107 kg);
Cable: 0.037 lb (0.017 kg) per foot.
Agency Approvals: CE.
*Consult factory for additional outputs.
**4.3 to 4.9 psi (10 to 11.54 in w.c.) congured ranges ±0.30% FS accuracy
The SERIES MBLT Miniature Submersible Level Transmitters measure the height
of liquid above the position in the tank referenced to atmospheric pressure. The
transmitter consists of a piezoresistive sensing element, encased in a 0.63˝ (16 mm)
diameter 316 SS housing.
FEATURES/BENEFITS
• Slender 0.63˝ (16 mm) diameter design ts in narrow openings
• Constructed for years of trouble free service with welded 316 SS body and 316 SS
nose cap
• Body top is 316 SS and tapered to prevent damage or snares when pulling the unit
out of the installation
• ±0.10% or ±0.25% FS accuracy output is better than BFSL or BSL rated outputs
used by most competitors
• Maintenance free lter eliminates particulate or water droplets from entering the
transducer
• Comes with a choice of polyether polyurethane or ETFE cable materials for excellent
chemical compatibility
• Incorporates lightning and surge protection, eliminating both power supply surges
and lightning ground strike transients (surge protection is not guaranteed and is not
covered by warranty)
APPLICATIONS
• Ballast tanks
• Ground water monitoring
• Surface water monitoring
• Dewatering
• Down hole
• Remote telemetry
• Remote ood monitoring
• Narrow conduit or pipe installations
• Remediation and environmental monitoring
NEW!
Low Power Models
A-297
SERIES MBLT | MERCOID BY DWYER
®
V
I
D
E
O
O
N
L
I
N
DWYER INSTRUMENTS, INC. | www.dwyer-inst.com
MODEL CHART
4 to 20 mA output
Model ±0.10%
4 to 20 mA output
Model ±0.25%**
0 to 5 V output
Model ±0.25%**
Range psi
(´ w.c.) [m w.c.]
Cable
Length Cable Type
-
-
-
-
MBLT-2SB-IVPF-20-40
MBLT-2SB-IVPF-30-50
MBLT-2SB-IVPM-10-15.2
MBLT-2SB-IVPF-50-70
MBLT-2SB-IVPM-20-26
MBLT-2SB-IVPM-30-36
MBLT-2SB-IVPF-100-120
MBLT-2SB-IVPM-40-46
MBLT-2SB-IVPF-150-170
MBLT-2SB-IVPM-60-66
MBLT-2SB-IVPF-200-220
MBLT-2SB-IVPF-350-370
MBLT-2SB-IVPM-100-106
MBLT-2SB-IVPM-200-206
MBLT-2SB-IVPF-690-710
MBLT-2SC-IVPP-5-40
MBLT-2SC-IVPF-15-40
MBLT-2SC-IVPM-5-12.2
MBLT-2SC-IVPM-10-30**
MBLT-2SC-IVPF-20-40
MBLT-2SC-IVPF-30-50
MBLT-2SC-IVPM-10-15.2
MBLT-2SC-IVPF-50-70
MBLT-2SC-IVPM-20-26
MBLT-2SC-IVPM-30-36
MBLT-2SC-IVPF-100-120
MBLT-2SC-IVPM-40-46
MBLT-2SC-IVPF-150-170
MBLT-2SC-IVPM-60-66
MBLT-2SC-IVPF-200-220
MBLT-2SC-IVPF-350-370
MBLT-2SC-IVPM-100-106
MBLT-2SC-IVPM-200-206
MBLT-2SC-IVPF-690-710
MBLT-2SC-VVPP-5-40
MBLT-2SC-VVPF-15-40
MBLT-2SC-VVPM-5-12.2
MBLT-2SC-VVPM-10-30**
MBLT-2SC-VVPF-20-40
MBLT-2SC-VVPF-30-50
MBLT-2SC-VVPM-10-15.2
MBLT-2SC-VVPF-50-70
MBLT-2SC-VVPM-20-26
MBLT-2SC-VVPM-30-36
MBLT-2SC-VVPF-100-120
MBLT-2SC-VVPM-40-46
MBLT-2SC-VVPF-150-170
MBLT-2SC-VVPM-60-66
MBLT-2SC-VVPF-200-220
MBLT-2SC-VVPF-350-370
MBLT-2SC-VVPM-100-106
MBLT-2SC-VVPM-200-206
MBLT-2SC-VVPF-690-710
5 (11.54) [3.52]
6.50 (15) [4.57]
7.10 (16.40) [5]
14.22 (32.84) [10]
8.66 (20) [6.10]
12.99 (30) [9.14]
14.21 (32.81) [10]
21.65 (50) [15.24]
28.42 (65.62) [20]
42.63 (98.43) [30]
43.31 (100) [30.48]
56.83 (131.23) [40]
64.96 (150) [45.72]
85.25 (196.85) [60]
86.62 (200) [60.96]
151.58 (350) [106.68]
142.09 (328.08) [100]
284.18 (656.17) [200]
298.83 (690) [210.31]
40 ft
40 ft
12.2 m
9.14 m
40 ft
50 ft
15.2 m
70 ft
26 m
36 m
120 ft
46 m
170 ft
66 m
220 ft
370 ft
106 m
206 m
710 ft
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
Polyether polyurethane
**4.3 to 4.9 psi (10 to 11.54 in w.c.) congured ranges ±0.30% FS accuracy
ACCESSORY
Model Description
A-297 Dessicant lter for vent tube. Removes humidity
for protection of the sensor. Changes color to
show saturation
OPTIONS
For custom ranges, cable lengths, or ETFE cable, contact the
website.