Document No.
2 / 11
1. 適応範囲/Scope
本規格は、MHF III Connector の性能と試験条件について規定する。
This specification covers the requirements for product performance and test methods of MHF III Connector.
2. 製品名称及び製品型番/Product Name and Parts No.
2.1 製品名称/Product Name
MHF III Connector
2.2 製品型番/Parts No.
Plug: 20609-002R
Receptacle: 20369-001E
3. 外観形状、寸法及び材質/Product Shape, Dimensions and Material.
図面参照
Refer to the drawing
4. 定格/Rating
4.1 適応ケーブル/Applicable cable
(1) 構成/Description
中心導体 : AWG#36(7/0.05),銀メッキ軟銅線
誘電体 : フッ素樹脂,外径 0.4(+0.04,-0.02),標準厚さ 0.125mm
外部導体 : 8/5/0.05,標準外径 0.65mm, 銀メッキ軟銅線又は錫メッキ軟銅線
ジャケット : フッ素樹脂,外径 0.81(+0.04,-0.02)mm, 標準厚さ 0.08mm
Inner conductor : AWG#36(7/0.05) ,Silver plating annealed copper wire
Dielectric core : Fluoro-plastics ,diameter 0.4(+0.04,-0.02)mm , nominal thickness 0.125mm
Outer conductor : 8/5/0.05 , nominal diameter 0.65mm , silver plating annealed copper wire or
tin plating annealed copper wire
Jacket : Fluoro-plastics , diameter 0.81(+0.04,-0.02)mm , nominal thickness 0.08mm
(2) 仕様/Requirements
特性インピーダンス : 50±2Ω (TDR��
標準静電容量 (参考値) : 96pF / m
293K(20℃)時の中心導体抵抗 : 1400Ω / km 以下
絶縁抵抗 : 1000MΩ・km以上
耐電圧 : AC1000V・1 分間にて絶縁破壊の無い事
Characteristic impedance : 50(+2,-2)Ω. by TDR method
Nominal capacitance ( Reference value ): 96 pF/m
Conductor resistance of inner conductor at 293K (20℃) : 1400Ω/km MAX.
Insulation resistance : 1000 MΩ・km MIN.
Dielectric withstand voltage : no breakdown at AC1000V for 1 minutes.