15.225
15.4750
V
V
10.5
5.6
12.4
7.0
A
SECTION V-V
DETAIL A
SCALE 16 : 1
SBT-BGA DIRECT MOUNT, SOLDERLESS SOCKET FOR
BURN-IN AND TEST APPLICATIONS
Features:
Wide temperature range (-55C to +180C)
•
High current capability (up to 4A)
•
Excellent signal integrity at high frequencies
•
Low and stable contact resistance for reliable production yield
•
Highly compliant to accommodate wide co-planarity variations
•
Automated probe manufacturing enables low cost and short lead time
•
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Tolerances:
Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Description: SBT-BGA 19x19 10mmx10mm 0.5mm pitch
Primary dimension units are millimeters, Secondary dimension units are [inches].
STATUS: Released
REV. A
DATE: 8/16/2013
Material: Material <not specified>
Finish:
Weight: 10.88
SBT-BGA-7004 Specification
SCALE: 3:1
SHEET: 1 OF 4
DRAWN BY: B. Schatz
FILE: SBT-BGA-7004
4X
1.7000 THRU ALL
Non Plated Hole
.50
Typ.
.28 (361x)
2X
.8500 THRU ALL
Non Plated Hole
0
.25*
7.6125
7.8625
8.8625
8.8625
0
7.6125
7.6125
8.8625
8.8625
1.2825
4.50
6.3625
4.50
3.8225
6.3625
4.25
6.3625
4.75
6.3625
16.075
A1 Marking
Insulation Plate Outline (Blue dotted line)
Socket Base Outline (red solid line)
.01
NOTES:
1. Target PCB Recommendations
2. Total thickness: 1.6mm min.
3. Plating: Gold or Solder finish
4. PCB Pad height: Same or higher than solder mask
*BGA pattern is offset 0.25mm
with respect to the mounting holes.
0
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Tolerances:
Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Description: Recommended Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
STATUS: Released
REV. A
DATE: 8/16/2013
Material: Material <not specified>
Finish:
Weight: 10.88
SBT-BGA-7004 Drawing
SCALE: 5:1
SHEET: 2 OF 4
DRAWN BY: B. Schatz
FILE: SBT-BGA-7004