Recommended Torque 8 in-lb/ 90.4 N-cm
36.2250
1.59
6.35
15.44
11.1100
AA
DETAIL AA
SCALE 12 : 1
Features
Wide temperature range (-55C to +180C)
•
High current capability (up to 4A)
•
Excellent signal integrity at high frequencies
•
Low and stable contact resistance for reliable production yield
•
Highly compliant to accommodate wide co-planarity variations
•
Automated probe manufacturing enables low cost and short lead
•
time
SBT-BGA DIRECT MOUNT, SOLDERLESS SOCKET FOR
BURN-IN AND TEST APPLICATIONS
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Tolerances:
Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Description: SBT-BGA 31x31mm 24x24 array 1.27mm pitch BGA380
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
STATUS: Released
REV. A
DATE: 8/4/2015
Material: Material <not specified>
Finish: N/A
Weight: 69.77
SBT-BGA-6039 Drawing
SCALE: 1.5:1
SHEET: 1 OF 4
ENG: S. Huang
FILE: SBT-BGA-6039 Dwg
DRAWN BY: M. Raske
2.54
5.08
36.225
±0.125
Socket Base Outline
36.225
±0.125
37.125
±0.125
Backing Plate Outline
16.8625
±0.0350
(x8)
0.85
±0.05
THRU (x2)
Non Plated Hole
1.70
±0.10
THRU (x8)
Non Plated Hole
1.25
1.25
37.7250
0.6400 pad (x380)
0.7500 (x8)
bottom pin guide
14.6050
14.6050
29.2100 (x4)
Orientation mark
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Tolerances:
Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Description: Recommended Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
STATUS: Released
REV. A
DATE: 8/4/2015
Material: Material <not specified>
Finish: N/A
Weight: 69.77
SBT-BGA-6039 Drawing
SCALE: 2.75:1
SHEET: 2 OF 4
ENG: S. Huang
FILE: SBT-BGA-6039 Dwg
DRAWN BY: M. Raske