6.35
1.59
9.46
16.51
R
40.225
40.60
DETAIL R
SCALE 10 : 1
Features
Wide temperature range (-55C to +180C)
•
High current capability (up to 4A)
•
Excellent signal integrity at high frequencies
•
Low and stable contact resistance for reliable production yield
•
Highly compliant to accommodate wide co-planarity variations
•
Automated probe manufacturing enables low cost and short lead
•
time
SBT-BGA DIRECT MOUNT, SOLDERLESS SOCKET FOR
BURN-IN AND TEST APPLICATIONS
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Tolerances:
Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance
±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change
without notice.
Description: SBT-BGA900 Socket, 35x35, 1.00mm, 34 x 34 Array
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
STATUS: Released
REV. B
DATE: 5/21/2014
Material: Material <not specified>
Finish:
Weight: 75.35
SBT-BGA-6034 Drawing
SCALE: 3:2
SHEET: 1 OF 4
ENG: V. Panavala
FILE: SBT-BGA-6034 Dwg
DRAWN BY: M. Raske
42.725
BACKING PLATE
40.225
SOCKET BASE
33.00
18.8625
±0.0500
(8)
*
2.7375
±0.0250
2.3625±0.0250
2.540±0.025
0.85 THRU
NON-PLATED HOLE (x2)
1.00 Typ.
1.610±0.050 THRU
NON-PLATED HOLE (x8)
5.080±0.025
0.510 (x1156 PAD)
40.60
1.9875 Ref.
1.25 1.25
41.925
42.30
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Tolerances:
Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance
±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change
without notice.
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
STATUS: Released
REV. B
DATE: 5/21/2014
Material: Material <not specified>
Finish:
Weight: 75.35
SBT-BGA-6034 Drawing
SCALE: 3:1
SHEET: 2 OF 4
ENG: V. Panavala
FILE: SBT-BGA-6034 Dwg
DRAWN BY: M. Raske