© Semiconductor Components Industries, LLC, 2015
November, 2015 − Rev. 0
1 Publication Order Number:
EVBUM2329/D
AP0202ATSL00XUGAH3-GEVB
AP0202AT Evaluation Board
User's Manual
Evaluation Board Overview
The evaluation boards are designed to demonstrate the features of
image sensors products from ON Semiconductor. This headboard is
intended to plug directly into the Demo 3 system. Test points and
jumpers on the board provide access to the clock, I/Os, and other
miscellaneous signals.
Features
• Clock Input
♦ Default – 27 MHz Crystal Oscillator
♦ Optional Demo 3 Controlled MClk
• Two Wire Serial Interface
♦ Selectable Base Address
• Parallel Interface
• HiSPi (High Speed Serial Pixel) Interface
• ROHS Compliant
Block Diagram
Figure 2. Block Diagram of AP0202ATSL00XUGAH3−GEVB
www.onsemi.com
EVAL BOARD USER’S MANUAL
Figure 1. AP0202AT Evaluation Board
AP0202ATSL00XUGAH3−GEVB
www.onsemi.com
2
Top View
Figure 3. Top View of the Board − Default Jumpers
Headboard Connector P6
RESET Switch SW7
Bottom View
Figure 4. Bottom View of the Board − Connectors
Baseboard Connector J1
FRAME_SYNC P40
SENSOR Access SDA P31
DIAG Operation P32
BEAGLE SDA P53
BEAGLE SCL P52
NET_MODE P58
SENSOR Access SCL P30
LSC EPROM P27
TRST_NET_N P49
SADDR P39
STANDBY P38
TRIGGER P59
SEN_SDATA P51
ON_LED P11
+5V0 P8
+1V2_DVDD Sel P55
ENLDO P36
+1V2_DVDD_REG P56
EXT_REG P37
OSC/XTAL P22
MCLK_IN P16
OSC/XTAL P23
FRAME_SYNC P40
SEN_RST_OUT P54
+3V3 P24
+1V8_VAA P41
+2V8_VDDPHY P12
+VDDIO_SENSOR P19
+VDDIO_LS P13
+VDDIO Select P57
+2V8_VAA_OTPM P14
+VDDIO P21