Description
FP-SNS-6LPNODE1 is an STM32Cube function pack which lets you connect your IoT node to a 6LoWPAN Wireless Sensor
Network and expose the sensor and actuator resources using standard application layer protocols.
This software together with the suggested combination of STM32 and ST devices can be used, for example, to develop smart
home, building or lighting applications. The package contains sample applications to implement sensor data reading and LED
control from a local or a remote device on the Internet.
The software runs on the STM32 microcontroller and includes drivers for the S2-LP Sub-1 GHz RF radio, the
SPIRIT1-based
sub-1 GHz RF communication modules (SPSGRF-868 and SPSGRF-915), as well as the motion, environmental, and time-of-
flight sensors.
Getting started with FP-SNS-6LPNODE1 software for IoT sensor node
connection to 6LoWPAN networks using sub-1GHz RF
UM2100
User manual
UM2100 - Rev 4 - April 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
1 Acronyms and abbreviations
Table 1. List of acronyms
Acronym Description
IDE Integrated development environment
BSP Board support package
HAL Hardware abstraction layer
UDP User datagram protocol
6LoWPAN IPv6 over low power wireless personal area networks
RPL Routing protocol for low power and lossy networks
MCU Microcontroller unit
RF Radio frequency
OS Operative system
CoAP Constrained application protocol
LWM2M Lightweight machine to machine
IoT Internet of things
IPSO IP for smart objects
MEMS Micro electro-mechanical systems
Wi-Fi Wireless LAN based on IEEE 802.11
GUI Graphical user interface
UM2100
Acronyms and abbreviations
UM2100 - Rev 4
page 2/26