2.2
285
Further information at www.HellermannTyton.co.uk/insulation
Date of issue: January 2019
For product specific approvals and specifications please refer to the Appendix.
Insulation
Heat Shrinkable Moulded Shapes
MATERIAL
Epoxy resins (EP)
Colour Black (BK)
Curing Temperature +135 °C
Curing Time 24 hours at +25 °C, 2 hours at +85 °C
Operating Temperature -75 °C to +150 °C
Features and benefits
• High performance, two-part epoxy adhesive
• Very resistant to most solvents and fuels, even at elevated temperatures
• Two different packages available
• V9500 available in 10 g bags for manual mixing
• Processing set: emery paper, small mixing bowl and wooden spatula
• High performance bonding
• Meets military requirements for heat shrinkable components
for harnesses
• VG-approved
Two-Component Adhesive for
Heat Shrinkable Tubing and Shapes
Two-component epoxy adhesive V9500.
V9500
The V9500 applicator gun guarantees the clean and precise coating of
special fittings.
TYPE Description
Designation as per
VG-Norm Article-No.
V9500 Epoxy Kit
5 x 10g sachets (50 g), 5 x mixing pots, 5 x mixing sticks, 5 x emery papers VG 95343 T15 A 001 A 627-95000
1 x dual cartridge (50 g), 5 x mixing pots, 5 x mixing sticks, 5 x emery papers VG 95343 T15 A 002 B 627-95001
V9500 Epoxy Cartridge Two-component adhesive cartridge VG 95343 T15 A 627-95002
V9500 Applicator Gun Applicator gun VG 95343 T15 DA 627-95003
V9500 Applicator Nozzle Mixing nozzle VG 95343 T15 MA 627-95004
All dimensions in mm. Subject to technical changes.
For Material / Adhesive information
please refer to page 256, 257.