Industrial Routers
LAN ROUTER
XR5i v2E Series
SPECIFICATIONS
FIXED INTERFACES
2× Ethernet 10/100 Mbits, independent or bridged
STANDARDS/REGULATION
EMC ETSI EN 301 489-1 V2.1.1, ETSI EN 301 489-17 V3.1.1
Safety
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
+ AC:2011
SOFTWARE FEATURES
Linux based, possibility to program your own application
NTP client, NTP Server – time synchronization
M-RAM memory inside – router statistic´s saving into memory
NETWORKING
DHCP – automatic IP addressing in LAN network
NAT/PAT – IP address and ports translation between inside/outside network
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
PPPoE Bridge – PPP frames encapsulation inside ETH frames
VPN TUNNELING
IPsec, OpenVPN, L2TP – secure encrypted tunnels
CONFIGURATION AND DIAGNOSTIC
HTTP server – configuration via web server
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
Router Management Software consisting of two parts:
R-SeeNet Server application can be programmed to automatically send SNMP
queries (Simple Network Management Protocol) to each router defined in the
network. The application retrieves status information from the routers and
records it in the SQL database.
R-SeeNet PHP is a web-based application that accesses the SQL database and
provides the network administrator detailed information on individual routers
and network health.
SmartWorx HUB takes management of your devices to new levels of flexibility and
efficiency. Giving you a complete view of your installed device population, SmartWorx
Hub delivers invaluable configuration, diagnostic and management facilities directly to
your desktop, wherever you are.
Manage a single device or your entire device population at the same time. Whether you
need to modify configuration parameters, download or upgrade installed firmware and
applications or view detailed information regarding network statistics, you can do it all
from any location.
WIFI
*optional
Antenna connector R-SMA – 50 Ohms
Supported WiFi band 2.4 GHz
Standards 802.11b, 802.11g, 802.11n
2.4 GHz supported channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
RX Sensitivity
11b, 11 Mbps: typ. -85 dBm
11g, 54 Mbps: typ. -70 dBm
(HT20) 11n, MSC7: typ. -66 dBm
(HT40) 11n, MSC7: typ. -62 dBm
TX Output Power
11b, 11 Mbps: min. 18, typ. 19, max. 20 dBm
11g, 54 Mbps: min. 14.5, typ. 16, max. 17.5 dBm
802.11n (HT20): min. 13.5, typ. 15, max. 16.5 dBm
802.11n (HT40): min. 13.5, typ. 15, max. 16.5 dBm
Type of device Access point, station
POWER
Source 9 - 36 VDC
Consumption
Idle - 1.6 W
WiFi Com. to 1.9 W
Full Com. to 2.5 W
MECHANICAL
Dimension Plastic version 51 x 87 x 116mm
Dimension Metallic version 42 x 87 x 113mm
Protection IP30
ENVIRONMENTAL
Operating Temperature -40 to +75°C
Storage Temperature -40° to +85°C
Humidity
Operating - 0 to 95% relative humidity non condensing
Storage - 0 to 95% relative humidity non condensing
CPU & MEMORY
CPU 32b ARM microprocessor, 0.25 DMIPS per MHz
Flash memory 16 MB DDR SDRAM
RAM 64 MB
M-RAM 128 kB
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
orders@advantech-bb.com
support@advantech-bb.com