Serial Device Server

ICDM-RX/TCP-2ST/RJ45-DIN

<

DIN-rail mounting and screw terminal connectors

<

TCP/IP &UDP Socket Services

<

Device drivers (Windows and Linux)

<

Function

The ICDM-RX/TCP product family enables the connection of serial devices (RS-232 / RS-422 / RS-485) using a device driver

(Windows or Linux) or Ethernet TCP/IP devices using socket services to an industrial Ethernet network. The integrated webserver enables

complete configuration of all module parameters like serial interface, baud rate, parity, data bits, stop bits, or flow control.

Products are available in different versions for DB9 or screw terminal connection.

Dimensions

Indicators/operating means

LED indication see manual

Electrical specifications

Rated operating voltage U

Nominal voltage 24 V DC

Interface

Interface type Software selectable interfaces: RS-232 , RS-422 , RS-485 (2 and 4-wire)

Physical 2 x Screw Terminal

Technical Data

Protocol Raw serial

Supported baud rates 300 bps to 230Kbps

Interface 1

Interface type Industrial Ethernet

Physical 1 x RJ45

Protocol TCP/IP

Additional protocols ARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO

over TCP), SNMP (MIB-II), TCP/IP &UDP socket services, Telnet, and TFTP, and

Degree of protection NEMA TS2

Electrical safety CSA C22.2 No. 60950 / UL60950

Emitted interference EN 61000-6-4, EN 55032, FCC Part 15 Subpart B, ICES-003, AS/NZS CISPR 32.

Noise immunity EN 61000-6-2 , EN 55024

Ambient conditions

Ambient temperature -40 ... 75 °C (-40 ... 167 °F)

Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Relative humidity max. 95 %

Altitude 0 ... 3048 m

Mechanical specifications

Inputs/outputs: 2 x Screw Terminals

Material

Housing Polyamide, UL94V-0

Mass 130.4g

Construction type Cabinet module

Mounting DIN mounting rail

Serial Device Server ICDM-RX/TCP-2ST/RJ45-DIN