This doc ument descr ibes par t-number -spec ific change s to rec ommended op erating condition s
and revised electrical specifications, as applicable, from those described in the MPC107 PCI
Bridge/Memory Controller Hardware Specifications (Order No. MPC107EC/D).
Specifi cations provid ed in this document supersede thos e in the MPC107 PCI Bridge /Memory
Controller Hardware Specifications, Rev .1 or later , for the part numbers listed in T able A only .
Specifications not addressed herein are unchanged. Because this document is frequently
updated, refer to http://www.motorola.com/semiconductors or to your Motorola sales office
for the latest version.
Note that headings a nd table n umbers in th is document a re not cons ecutivel y number ed. They
are intended to correspond to the heading or table affected in the general hardware
specification.
Part numbers addressed in this document are listed in Table A. For more detailed ordering
information, see Section 1.9, “Ordering Information.”
Table A. Part Numbers Addressed by This Dat a Sheet
Motorola
Part Number
Operating Conditi ons
Significant Differences from
Hardware Specification
Memory
Bus
Frequency
(MHz)
V
DD
T
j
(°C)
XPC107APX133WD 133 2.7 ± 100 mV 0 to 85 Modified voltage and temperature
specif ications to achie ve 133 MHz
Note: The X pref ix i n a M oto rol a p a r t number designat es a “Pilot Prod uction Prototype” as de fined by
Motorola SOP 3-13. These are from a limited production volume of prototypes manufactured, tested,
and Q.A. inspected on a qualified technology to simulate normal production. These parts have only
preliminary reliability and characterization data. Before pilot production prototypes may be shipped,
written authorization from the customer must be on file in the applicable sales office acknowledging the
qualification status and the fact that product changes may still occur while shipping pilot production
prototypes.
Advance Informatio n
MPC107APXPNS/D
Rev. 1, 11/2002
MPC107 Part Number
Specificat ion fo r the
XPC107APXnnnWx Series
Motorola Part
Numbers Affect ed:
XPC107APX133WD
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
2 MPC107 Part Number Specification for the MOTOROLA
XPC107APXnnnWx Series
General Parameters General Parameters
1.3 General Parameters
This section summarizes changes to the general parameters of the MPC107 described in the MPC107 PCI
Bridge/Memory Controller Hardware Specifications.
Core power supply 2.7 V ± 100 mV DC nominal
1.4.1 DC Electrical Characteristics
Table 2 provides the recommended operating conditions for the MPC107 part numbers described herein.
Table 2. Recommended Operating Conditions
Characteristic Symbol Recommended Value Unit Notes
Supply voltage V
DD
2.7 ± 100 mV V 4
PLL supply voltage AV
DD
2.7 ± 100 mV V 5
DLL supply voltage LAV
DD
2.7 ± 100 mV V 5
Die-junction temperature T
j
0 to 85 °C
Cautions:
4. OV
DD
must not exceed V
DD
/AV
DD
//LAV
DD
by more than 1.8 V at any t ime, includ ing du ring power-on reset.
5. V
DD
/AV
DD
//LAV
DD
must not exceed OV
DD
by more than 0.6 V at any time, including during power-on reset.
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...