Technical data sheet P1000A-F
www.belimo.com P1000A-F • en-gb • 2021-10-13 • Subject to change 1 / 3
•
•
•
•
•
•
Feedback potentiometer, suitable for the
spring-return actuators NF..A.., SF..A.., LF..
• Nominal resistance1 kΩ
• incl. installation accessories
Technical data
Electrical data Nominal resistance 1 kΩ
Tolerance ±5%
Loading capacity Max. 1 W
Linearity ±2%
Resolution Min. 1%
Residual resistance Max. 5% on both sides
Connection potentiometer Cable 1m, 3 x 0.75mm² halogen-free
Safety data
Protection class IEC/EN III, Safety Extra-Low Voltage (SELV)
Power source UL Class 2 Supply
Degree of protection IEC/EN IP54
EMC CE according to 2014/30/EU
Certification IEC/EN IEC/EN60730-1 and IEC/EN60730-2-14
Certification UL cULus according to UL60730-1A, UL60730-2-14
and CAN/CSAE60730-1
Mode of operation Type 1
Rated impulse voltage supply 0.8kV
Pollution degree 3
Ambient temperature -30...50°C
Storage temperature -40...80°C
Ambient humidity Max. 95% RH, non-condensing
Servicing maintenance-free
Weight
Weight 0.31kg
Safety notes
The device must not be used outside the specified field of application, especially not in aircraft
or in any other airborne means of transport.
Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or
aggressive gases interfere directly with the device and that it is ensured that the ambient
conditions remain within the thresholds according to the data sheet at any time.
Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
The device may only be opened at the manufacturer's site. It does not contain any parts that
can be replaced or repaired by the user.
Cables must not be removed from the device.
The device contains electrical and electronic components and must not be disposed of as
household refuse. All locally valid regulations and requirements must be observed.