ATCA Blades & Integrated Systems

Features

Netarium

-6v2

6U 6-Slot AdvancedTCA Reference

Systems with Advantech Shelf Manager

support

 6U 6-slot 19" rackmount ATCA shelf with integrated switches and server

blades

 4 node + 2 hub slots with power distribution and cooling for up to 300W per

slot

 6 rear transition module (RTM) slots

 Supports two redundant Advantech Shelf Managers with Telco alarm signals

 40G ATCA-compliant backplane, with dual star topology on Base and Fabric

Interfaces, handles up to 10 Gbps and 3.125 Gbps per differential pair

 Redundant AC and DC power options

 Right-to-Left Push-Pull Cooling Mode

 Hot swappable FRUs (blades, RTMs, fan trays, power modules, and ShMM)

 PICMG 3.0 (AdvancedTCA Base Speciﬁcation) Compliance

Introduction

Advantech’s Netarium series of ATCA reference systems are speciﬁcally targeted to help network equipment providers reach superior levels of performance over traditional rackmount

servers or appliances and extend their product range at the high end. The series represents a new generation of systems which offer higher performance, greater scalability and extreme

ﬂexibility by using the latest 40 Gigabit Ethernet (40G) backplanes, switches and application blades. Advantech optimizes the systems to achieve the highest possible density at the

rack level, enabling a maximum number of processor cores, network ports and switching capacity.

Each system is tailored for customers to rapidly deploy in data communication markets for applications which require faster and deeper packet processing such as policy and

charging enforcement, network security, real-time trafﬁc monitoring, load balancing, subscriber analytics and content optimization among others. As ATCA was designed to meet the

carrier-grade constraints of the telecom industry, the systems integrate the chassis, cooling, power distribution and shelf management into an off-the-shelf platform solution capable

of superior 5 NINES availability and reliability.

The mid-range Netarium-6v2, which supports Advantech’s SMM-5060 Advanced Shelf Management Module, providing IPMI2.0 and ATCA compliant shelf management, focuses on

the high performance needs of large enterprise customers in a cost effective system loaded with four MIC-5333 dual Intel

Xeon

blades and 40G switches in a dual-star conﬁguration.

The system provides up to 1.28 Tbps switching capacity and each MIC-5333 blade with RTM pair can accommodate up to 4 FMMs for over 100 Gbps egress per blade with high-speed

encryption using FMM-based acceleration modules.

Many different payloads can be integrated into Advantech Netarium systems and conﬁgured to address diverse industry applications. For more details on integrating a speciﬁc

conﬁguration please contact your local sales representative.

Speciﬁcations

Number of slots

Front blades 6 ATCA compliant node or hub blades (4 node blades and 2 hub blades)

RTM’s 6 ATCA rear transition modules

Backplane

IPMB Bussed (radial available on request)

Base interface Dual star, 1000 Base-T

Fabric interface Dual star, up to 10Gbps and 3.125Gbps per differential pair

Cooling

Technology

Two front pluggable, hot swappable push-pull fan trays with N+1 redundant fans

(no degradation with a single fan failure)

Max. Capacity >CPTA B.4, 300W/slot

Air ﬁlter One hot swappable air ﬁlter on the right side of chassis

Accessibility

Front ATCA blades, ShMC’s, front fan trays

Rear RTM’s, PEM’s / AC PSU’s

Power

AC Integrated dual, redundant AC power supplies, 2000W

PSU cooling Self cooled

DC feed 2 redundant, hot swappable PEMs w. integrated EMI ﬁlters

DC voltage -36V to -72V (Nominal -48V)

Current rating 40A per feed

Shelf management

Full featured Dual, redundant enhanced shelf managers based on Advantech SMM-5060

Interfaces RMCP, SSH, SNMP, CLI, Web and serial interfaces

Telco alarm Telco alarm signals, populated on each ShMM

Sensors FRU presence, fan health, PSU health, temperatures, input voltages

Miscellaneous

ESD plug Front and rear

Cable management Front / rear cable trays (optional)

Physical Characteristics

Dimensions (H x W x D) 6U x 19” x 462mm

Weight 23kg (chassis weight only)

RoHS

COMPLIANT

2002/95/EC

All product specifications are subject to change without notice. Last updated: 21-Jun-2017

www.advantech.com/products

Online Download

Netarium-6v2

Ordering Information

Model Series Conﬁguration

Netarium-6v2 (AC)

6U, 6-slot ATCA chassis with 2x 2000W AC PSUs, 2 fan trays,

air ﬁlter, dual star backplane, optional ShMM

Netarium-6v2 (DC)

6U, 6-slot ATCA chassis with 2 PEMs, 2 fan trays, air ﬁlter,

dual star backplane, optional ShMM

Note: Please contact your local Advantech sales representative for more information.