IEC 60086-4:2019
See Test Report for National Differences
JPTUV-117746
2020-12-23
Jason Tang
N/A
Lithium Manganese Dioxide Battery
001CN20YXE3
POWER GLORY BATTERY TECH(SHENZHEN) CO., LTD
Village,Heshuikou Community, Gongming Town,, Guangming New
District,Shenzhen, 518000 Guangdong, P.R. China
Room 306,West Four Row,Heshuikou
Yichang Power Glory Technology Co., LTD
No.19, Xianfeng Road, Xiaoting District,
Yichang City, Hubei, P.R. China
Yichang Power Glory Technology Co., LTD
Yichang City, Hubei, P.R. China
No.19, Xianfeng Road, Xiaoting District,
TÜV Rheinland Japan Ltd.
Global Technology Assessment Center
4-25-2 Kita-Yamata, Tsuzuki-ku
Yokohama 224-0021, Japan
Phone + 81 45 914-3888
Fax + 81 45 914-3354
Mail: info@jpn.tuv.com
Web : www.tuv.com
3.0Vdc, 245mAh
Refer to the test report
CR2032
Test Report issued under the responsibility of:
TEST REPORT
IEC 60086-4
Primary batteries
Part 4: Safety of lithium batteries
Report Number. .............................. :
CN20YXE3 001
Date of issue ................................... :
2020-12-22
Total number of pages .................. :
21 pages
Name of Testing Laboratory
preparing the Report ..................... :
Applicant’s name ........................... :
Address ........................................... :
Test specification:
Standard ......................................... :
Test procedure ............................... :
Non-standard test method ............ :
Test Report Form No. .................... :
Test Report Form(s) Originator .... :
Master TRF ..................................... :
Copyright © 2019 IEC System of Conformity Assessment Schemes for Electrotechnical
Equipment and Components (IECEE System). All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the
CB Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing
Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,
responsible for this Test Report.