ATtiny416/816

ATtiny416/816 Silicon Errata and Data Sheet Clarification

The ATtiny416/816 devices you have received conform functionally to the current device data sheet

(www.microchip.com/DS40001913), except for the anomalies described in this document. The errata described in this

document will likely be addressed in future revisions of the ATtiny416/816 devices.

Notes:

• This document summarizes all the silicon errata issues from all revisions of silicon, previous as well as current

• Refer to the Device/Revision ID section in the current device data sheet (www.microchip.com/DS40001913) for

more detailed information on Device Identification and Revision IDs for your specific device, or contact your local

Microchip sales office for assistance

Errata

DS40002116C-page 1

1. Silicon Issue Summary

Legend

- Erratum is not applicable.

X Erratum is applicable.

Peripheral Short Description Valid for Silicon Revision

ATtiny416 ATtiny816

Rev. A Rev. B Rev. C Rev. A Rev. B

Device

2.2.1 The Temperature Sensor is Not Calibrated on Parts

with Date Code 727, 728 and 1728 (Year 2017, Week

27/28)

- X - - -

2.2.2 Writing the OSCLOCK Fuse in FUSE.OSCCFG to ‘1’

Prevents Automatic Loading of Calibration Values

X X X X X

2.3.1 Coupling Through AC Pins - - - X X

2.3.2 AC Interrupt Flag Not Set Unless Interrupt is Enabled X - - X X

2.3.3 False Triggers May Occur Under Certain Conditions X - - - -

2.3.4 False Triggers May Occur Under Certain Conditions - - - X X

2.3.5 False Triggering When Sweeping Negative Input of

the AC When the Low Power Mode is Disabled

- - - X X

ADC

2.4.1 One Extra Measurement Performed After Disabling

ADC Free-Running Mode

X X X X X

2.4.2 Changing ADC Control Bits During Free-Running

Mode not Working

X - - X X

2.4.3 ADC Wake-Up with WCMP X - - X X

2.4.4 SAMPDLY and ASDV Does Not Work Together With

SAMPLEN

X - - - -

2.4.5 ADC Functionality Cannot be Ensured with CLKADC

Above 1.5 MHz and a Setting of 25% Duty Cycle

X X X X X

2.4.6 ADC Performance Degrades with CLKADC Above 1.5

MHz and VDD < 2.7V

X X X X X

2.4.7 Pending Event Stuck When Disabling the ADC - - - X X

2.4.8 ADC Interrupt Flags Cleared When Reading RESH X - - X X

CCL

2.5.1 Connecting LUTs in Linked Mode Requires OUTEN

Set to ‘1’

X X X X X

2.5.2 D-latch is Not Functional X X X X X

2.5.3 The CCL Must be Disabled to Change the

Configuration of a Single LUT

X X X X X

PORTMUX

2.6.1 Selecting Alternative Output Pin for TCA0 Waveform

Output 0-2 also Changes Waveform Output 3-5

X X X - -

ATtiny416/816

Silicon Issue Summary

Errata

DS40002116C-page 2