AMS Device Manager Product Data Sheet
August 2020
Wireless Interface
Identify and access devices with an interface to
the Emerson Wireless
Gateway
Access stranded diagnostics through the
Emerson Wireless 775 THUM
™
Adapter
Identify and troubleshoot critical device alerts.
Expand the value of AMS Device Manager to new
areas of your
plant
AMS Device Manager gives you easy access to HART, Foundation
™
eldbus, and WirelessHART devices, all in a single application.
Access More Plant Diagnostics
with Lower Costs
The AMS Device Manager Wireless Interface gives you easy
access to your IEC 62591 (WirelessHART™) devices via the
Emerson Wireless Gateway. Use AMS Device Manager to
congure, calibrate, diagnose, and document device activities
in one location, while managing your HART
®
, Foundation™
eldbus, and WirelessHART devices in a single application. With
the Wireless Interface, you get a cost-effective solution for
remote conguration and diagnostics without the additional
costs of multiplexer installation and wiring.
Communicate with Inaccessible Assets
The Wireless Interface helps you get more out of your intelligent
wireless eld devices through an online AMS Device Manager
system. With AMS Device Manager, you can quickly check
the health of a connected WirelessHART device using the
diagnostics and monitoring capabilities. The Alert Monitor
summary screen provides an overview of all device alerts and
lets you access additional device information for more details.
AMS Device Manager makes conguration of wireless devices
fast and easy. Use conguration management to change, store,
compare, and transfer device congurations without ever going
into the eld. Streamline calibration by dening device test
schemes, scheduling device calibration, and managing device
calibration data.
Simplify documentation around device tasks with the Audit
Trail. In addition, manual entries can be created to document
events that may not be automatically captured.
www.emerson.com/ams 2
Wireless Interface
August 2020
Access Stranded Diagnostics
The Emerson Wireless 775 THUM Adapter enables you to easily
communicate predictive diagnostics to AMS Device Manager
from stranded HART devices in your plant.
You can retrot the THUM adapter to any existing two or
four-wire HART device and wirelessly transmit measurement
and diagnostic information.
You will be able to see the health and performance of new areas
of your plant, helping you improve availability.
Interface Architecture
The Wireless Interface for AMS Device Manager supports
the Emerson Wireless Gateway and devices connected to it.
Conguration is quick and easy, and Lifecycle Services
are available to help you get started.
Real-Time Remote Diagnostics
Wireless technology also lets you access diagnostics from your
most remote devices. Through the OpenEnterprise System
Interface, you can use AMS Device Manager to view, congure,
and diagnose WirelessHART devices connected to a IEC62591
Wireless Interface Cards installed in ROC800, FlosBoss107,
or ControlWave RTUs. network. With real-time diagnostic
information, you can eliminate unnecessary and expensive
trips to the eld and make sure your maintenance personnel
know what the problem is and have the tools to correct it
when they do make a trip. You can also reduce downtime
by troubleshooting small problems from your control
room before they become big ones in the eld.
AMS Device Manager’s enhanced graphical interface provides clear indications of device status and process variables, extending the
benets of Plantweb
to WirelessHART devices.