AMS Device Manager Product Data Sheet
August 2020
QuickCheck SNAP-ON
™
Application
Facilitate and accelerate interlock checkout to
save time and improve
safety
Substantially reduce commissioning time when
testing 1 out of 3
voting
Read and export as-built
conguration
information
Access real-time information from HART
®
and
F
oundation
™
Fieldbus
devices
Take set up off the critical path with bulk
import
Streamline interlock checkout by grouping, monitoring and xing
the output of HART transmitters from the convenience of your
AMS Device Manager workstation.
Overview
The interlock checkout phase of a new plant is critical to
the safety and success of the project. During this time,
technicians check the proper response of the process control
system against simulated normal and emergency conditions.
If a digital control system (DCS) controls the process, simulation
software checks the DCS conguration and programming, but
it does not verify the operation of the eld devices or wiring.
AMS Device Manager and QuickCheck can help you verify all
wiring from the eld to the control room, allowing you to focus
on checking the DCS conguration and your DCS logic.
Enhance Safety, Save Time and
Improve the Bottom Line
Sending technicians into the field with handheld
communicators to manually place smart devices in loop test
mode is time intensive and may expose the field technician to
a variety of hazards including heights, temperature extremes
and chemicals. With the QuickCheck SNAP-ON application, you
can group, monitor and fix the output of HART transmitters
from the safety of an AMS Device Manager workstation. A single
database allows group creation and execution from the server
plus or any Client SC station.