PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: 503-404-5594 www.leviton.com/les
© 2011 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
APPLICATIONS
There is a complete range of remote control
stations available for D4200 systems. Their
DECORA
®
design matches other DECORA
®
devices, and accepts any of the DECORA
®
or
DECORA
®
PLUS screwless wallplates. These
stations allow remote access to many of the
D4200’s functions, from multiple locations.
Several remote stations can be combined in one
location to provide the exact control functions
required. Rooms with multiple entrances may
use different remote stations at each entry,
providing control of the functions that are best
suited to that location.
FEATURES
• Remote controls available in 3 different
configurations.
• Up to 5 pushbuttons for full control, or simple
two push button stations where only limited
access to controls is desired.
• All control switches are back-lighted to indicate
what has been selected.
• Excellent tactile feel, and a “click” you can feel
• Used with Leviton DECORA
®
PLUS plates.
• No visible fasteners.
• Most units have an infrared receiver inside, and
presets can be selected from a remote hand
held infrared transmitter.
• As many as 127 units can be operated a Luma-
Net network
• Only four wires required, two data wires and
two low voltage (12 volt DC) power wires.
• All wiring is Class 2.
• Each device is supplied with a white faceplate.
• Can slave to multiple master stations.
D4200 Remote Stations
D4200 Remote Stations
SNAP ON COVER
REMOVE CENTER TAB PRIOR TO
INSTALLATION OF SNAP ON COVER
TERMINAL HEADER
REMOVE CENTER TAB
PRIOR TO INSTALLATION
OF SNAP ON COVER
STANDARD 1 1/2” DEEP
1-GANG BACK BOX.
USE STEEL CITY #GW135G
OR RACO #695 BY E.C.
INFRARED SENSOR
2011