JUMO digiLine CR ST10
Transmitter for separate conductive
conductivity sensor (type 202762)
www.jumo.net
PR 20045 EN/00730207/V1
Brief overview
The conductivity sensor has 4 electrodes made of robust
special graphite and features a large measuring range. As
a result, it is predestined for determining the conductivity
of high salt concentrations. It is therefore not only used in
drinking and process water plants but also in such applica-
tions as salt and sea water. The proven design allows the
sensor to be easily installed in commercially available pro-
cess fittings with a Pg 13.5 thread.
Advantages of JUMO digiLine electronic
components
The use of JUMO digiLine electronic components en-
sures interference-free digital data transmission for op-
timum process monitoring. The modular system can be
used for individual measuring points as well as for sensor
networks. Plug and Play functionality when connected to
transmitters from the JUMO AQUIS touch series facilitates
the exchange of sensors. The JUMO DSM (Digital Sensor
Management) software tool enables simple, reliable sen-
sor calibration as well as comprehensive measuring point
management to be conveniently carried out on a PC. A ver-
sion with analog output (4to20mA) allows integration into
existing plants.
Technical data
Designation JUMO BlackLine CR4P
Data sheet 202931
Measuring range,
cell constant
1µS/cmto300mS/cm
K = 0.25 cm
-1
Operating
temperature
-5to+80°C
Maximum pressure 6bar at 25°C
Temperature
measurement
Pt100 or Pt1000, class B
Electrical
connection
Fixed cable or M12 connector
(digiLine capable)
Insertion length 120mm
Diameter 12mm
Materials in contact
with the medium
Cell housing: PPE
Electrode: graphite
Process connection Screw head Pg13.5
Application areas
• Salt water and sea water applications
• Slightly contaminated rinsing and purification baths
• Fertilizer solutions
• Drinking and well water
• General water technology