RELATED PRODUCTS
APPLICATION EXAMPLEBENEFITS
– No configuration needed for out-of-the-box RF
communications
– Common Digi XBee footprint for a variety of RF modules
– Simple topology to deploy and grow
– 2.4 GHz for worldwide deployment
– Multiple antenna options
– Outdoor RF line-of-sight range up to 3.2 km (2 miles)*
with high-gain antennas
– DigiMesh peer-to-peer mesh networking protocol
- Supports self-healing and discovery for network
stability
Embedded RF modules deliver wireless connectivity using
the innovative and easy-to-deploy DigiMesh® protocol
Digi XBee® DigiMesh® S2C 2.4 embedded RF modules provide
wireless connectivity to electronic devices using a globally
deployable 2.4 GHz transceiver. These modules use the
DigiMesh networking protocol. This innovative, peer-to-
peer mesh network oers users added network stability
through self-healing, dense network operation, extending the
operational life of battery dependent networks.
Digi XBee modules are ideal for low-power applications.
Products in the Digi XBee family are easy to use, share a
common hardware footprint, and are fully interoperable with
other Digi XBee products utilizing the same technology.
DIGI XBEE
S2C DIGIMESH 2.4
Digi XBee modules are available in a variety of dierent
protocols to suit dierent applications, enabling users to
substitute one Digi XBee module for another with minimal
development time and risk.
The updated Digi XBee S2C DigiMesh module is built with
the Silicon Labs EM357 SoC and oers improved power
consumption, support for over-the-air firmware updates, and
provides an upgrade path to IEEE 802.15.4 or Zigbee mesh
protocols if desired.
MESH NETWORKING
EMBEDDED RF
MODULES FOR OEMS
Ethernet
DIGIMESH® WIRELESS MESH NETWORK
DIGI XBEE® S2C
DIGIMESH MODULE
Wireless/Telco/VPN
DIGI REMOTE MANAGER®HEADQUARTERS
CONNECTPORT® X
GATEWAY
Street Light
Street Light
Street Light
Gateways Adapters Network
Extenders
Modules Development
Kits
DIGI.COM
SPECIFICATIONS
Digi XBee® S2C DigiMesh® 2.4
PERFORMANCE
TRANSCEIVER CHIPSET
Silicon Labs EM357 SoC
DATA RATE
RF 250 Kbps, serial up to 1 Mbps
INDOOR/URBAN RANGE*
Up to 60 m (200 )
OUTDOOR/RF LINE-OF-SIGHT
RANGE*
Up to 1200 m (4000 )
TRANSMIT POWER
3.1 mW (+5 dBm) / 6.3 mW (+8 dBm) boost mode
RECEIVER SENSITIVITY (% PER)
-100 dBm / -102 dBm boost mode
FEATURES
SERIAL DATA INTERFACE
UART, SPI
CONFIGURATION METHOD
API or AT commands, local or over-the-air (OTA)
FREQUENCY BAND
ISM 2.4 GHz
FORM FACTOR
Through-hole, surface mount
HARDWARE
S2C
ADC INPUTS
(4) 10-bit ADC inputs
DIGITAL I/O
15
ANTENNA OPTIONS
Through-hole: PCB antenna, U.FL connector, RPSMA connector, or integrated wire; SMT: RF pad, PCB antenna, or U.FL connector
OPERATING TEMPERATURE
-40º C to 85º C (-40º F to 185º F)
DIMENSIONS (L X W X H) AND
WEIGHT
Through-hole: 2.438 x 2.761 cm (0.960 x 1.087 in)
SMT: 2.199 x 3.4 x 0.305 cm (0.866 x 1.33 x 0.120 in)
NETWORKING AND SECURITY
PROTOCOL
Digi XBee® DigiMesh® 2.4 (proprietary 802.15.4 based mesh protocol)
UPDATABLE TO DIGI ..
PROTOCOL
Yes
UPDATABLE TO ZIGBEE
PROTOCOL
Yes
INTERFERENCE IMMUNITY
DSSS (Direct Sequence Spread Spectrum)
ENCRYPTION
128-bit AES
RELIABLE PACKET DELIVERY
Retries/acknowledgements
IDS
PAN ID and addresses, cluster IDs and endpoints (optional)
CHANNELS
16 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE
2.1 to 3.6 V
TRANSMIT CURRENT
33 mA @ 3.3 VDC / 45 mA boost mode
RECEIVE CURRENT
28 mA @ 3.3 VDC / 31 mA boost mode
POWER-DOWN CURRENT
<1 μA @ 25º C (77º F)
REGULATORY APPROVALS
FCC, IC (NORTH AMERICA)
Yes
ETSI (EUROPE)
Yes
RCM (AUSTRALIA AND
NEW ZEALAND)
Yes
TELEC (JAPAN)
Yes
*Range figure estimates are based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver,
height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including indoor and
outdoor structures such as walls, trees, buildings, hills, and mountains.