(• = Same value as above)
A series of shielded high voltage connectors, kits and cable assemblies designed to minimize the risk of electrical shock to personnel through the use of
recessed contacts. Both the panel and cable connectors have recessed contacts and will stand off the rated voltage in the unmated condition.
Note: Voltage ratings apply in the mated condition only. Unmated 521 rated voltage is 20 kVDC and 531 is 10 kVDC.
PLUG KITS
RECEPTACLES
531 167-3555
• Mounting: Allow clearance for 1/2-28 UNEF thread
• Panel Mounting Torque: 42 to 48 in-lbs
531: 167-9096 Uses Wire 167-2669
• Mounting: Allow clearance for 1/2”-28 UNEF thread
• Panel Mounting Torque: 42 to 48 in-lbs
531 167-3705
• Mounting: Allow clearance for 1/2”-28 UNEF thread
• Panel Mounting Torque: 42 to 48 in-lbs
“A” DIA.
B
521 167-3517
• Mounting: Allow clearance for 5/8-24 UNEF thread
• Panel Mounting Torque: 90 to 95 in-lbs
• Pressure: Sealed for 1 ATM differential pressure
• Max Leakage: 1x10
-6
cc/s He @ 1 ATM differential
521 167-9100 Uses Wire RG213/U
• Mounting: Allow clearance for 5/8”-24 UNEF thread
• Panel Mounting Torque: 90 to 95 in-lbs
• Pressure: Sealed for 1 ATM differential pressure
• Max Leakage: 1x10
-6
cc/s He @ 1 ATM differential
521 167-3704
• Mounting: Allow clearance for 5/8”-24 UNEF thread
• Panel Mounting Torque: 90 to 95 in-lbs
• Pressure: Sealed for 1 ATM differential pressure
• Max Leakage: 1x10
-6
cc/s He @ 1 ATM differential
SERIES P/N “HEX” “B” “C” “D”
531 167-3555 .750 / 19.1 2.70 / 68.6 1.62 / 41.2 .312 / 7.92
521 167-3517 .930 / 23.6 3.94 / 100 2.56 / 65.0 .250 / 6.35
SERIES P/N “HEX” “B” “C” “D”
531 167-9096 .750 / 19.1 2.88 / 73.0 1.270 / 32.3 .312 / 7.92
521 167-9100 1.06 / 27.0 4.00 / 102 2.08 / 52.8 .437 / 11.1
SERIES P/N “HEX” “B” “C” “D”
531 167-3705 .750 / 19.1 3.13 / 79.5 1.27 / 32.3 .312 / 7.92
521 167-3704 1.06 / 27.0 4.75 / 121 2.08 / 52.8 .437 / 11.1
531 SL SERIES
|
10 kVDC | SEA LEVEL
531 SERIES
|
15 kVDC | 70,000 FT
-40º TO 85ºC
521 SL SERIES
|
20 kVDC | SEA LEVEL
521 SERIES
|
25 kVDC | 70,000 FT
531 SL
531
521 SL
Sealed, Front Mount
Sealed, Single-Ended Rear Mount, Cable Assembly Sealed, Double-Ended, Front Mount Feedthrough
521531
531 531
521 521
.602”
15.2
.480”
12.2
.630”
16.9
.508”
12.9
OPTIONAL MOUNTING HOLES
OPTIONAL
MOUNTING HOLES
OPTIONAL
MOUNTING HOLES
521: See Table Below
SERIES P/N “A” “B” WIRE P/N
531 SL 167-3554 Ø.625 / 15.9 2.72 / 69.0 167-2669
531 167-4535 • • •
521 SL 167-3516 Ø
.750
/ 19.1
4.41 / 112
RG213/U
521 167-3516-1
• •
RG214/U
521 P/N WIRE P/N
167-4534 RG213/U
167-4534-1 RG214/U
167-4534-C 167-2669
B
B
B
C
C
C
“Hex”
“Hex”
“Hex”
“O” RING
“O” RING
“O” RING
“D” Max Panel Thickness
“D” Max. Panel Thickness
“D” Max. Panel Thickness
4.41”
112
Ø
.750”
19.1
.480”
12.1
.480”
12.1
.725”
18.4
.725”
18.4
.508”
12.9
.508”
12.9
.755”
19.2
.755”
19.2
17
(Dimensions shown as in/mm)
**Cable Assembly Ordering Information: All cable assembly cable lengths are to be specified in inches only. For example, to order part number 178-6027 with a cable length of 10 feet 8 inches
the cable assembly part number would be specified as 178-6027-128N.
• Note: Product numbers and specs subject to change without notice. • Products listed represent only a small selection of Teledyne Reynolds’ products please visit www.teledynereynolds.com for the
most up to date product information. • Contact Teledyne Reynolds’ Engineering to discuss custom designs. WARNING: Connectors should NEVER be handled mated or unmated when voltage is applied.
Rev. 01-042113
531 SL AND 531 CABLE ASSEMBLIES
521 SL CABLE ASSEMBLIES
521 CABLE ASSEMBLIES
Single-Ended, Shielded, Pigtail
167-4450-1
**
Double-Ended, Shielded
531 SL: 167-3648
531: 167-4561
**
Single-Ended, Shielded, Pigtail
531 SL: 167-4451
531: 167-9003
**
Single-Ended, Shielded, Pigtail
167-4596-1
**
Double-Ended, Shielded
167-4569-1
**
SINGLE-ENDED DOUBLE-ENDED WIRE P/N
167-4450-4 167-3638-4 RG214/U
SINGLE-ENDED DOUBLE-ENDED WIRE P/N
167-4596-4 167-4569-4 RG214/U
178-6404* 178-9879* 167-2669
*Not shown
Double-Ended, Shielded
167-3638-1
**
531 SL SERIES
|
10 kVDC | SEA LEVEL
531 SERIES
|
15 kVDC | 70,000 FT
-40º TO 85ºC
521 SL SERIES
|
20 kVDC | SEA LEVEL
521 SERIES
|
25 kVDC | 70,000 FT
Series
Voltage
Rating
(kVDC)
Altitude
Rating (ft)
Operating
Temp. (ºC)
Current
Rating
(Amp)
Receptacle
Insulator
Material
Plug
Insulator
Material
Coupling
Style
Coupling Nut
Material/
Finish
Plug Contact
Material/Finish
(Socket)
Recept. Contact
Material/Finish
(Pin)
Wire Type
Wire
Insulation
Braid
Termination
Test
Voltage
@ 70,000 ft
Test
Voltage
@ Sea Level
531 SL
10 Sea Level -40 to 85 10 Plastic Plastic Bayonet Brass/Ni
BeCu/Au
Brass/Au Shielded PE Crimp N/A 13
531
15 70,000 • • • • • • • • • • • 31 N/A
521 SL
20 Sea Level • 20 • • • • • • • • • N/A 28
521
25 70,000 • • • • • • • • • • • 41 N/A
WIRE SPECIFICATIONS
SERIES SPECIFICATIONS
Part #
Operating
Voltage
(kVDC)
Conductor Insulation Shielding Jacket
Impedance
Ω
Attenuation
dB/100 ft @
400mhz
Capacitance
pF/FT (Nom.)
@1k HZ
AWG Strands Plating Material ø in./mm AWG Plating ø in./mm Material ø in./mm
167-2669
20 16 19/29 TPC Silicone .118 / 3.00 36 TPC .150 / 3.81 PE .195 / 4.95 31 16 48
(• = Same value as above)
18
• Uses Wire 167-2669
• Uses Wire RG213/U
• Uses Wire RG213/U
• Uses Wire RG213/U
• Uses Wire RG213/U
• Uses Wire 167-2669
Rev. 01-042113