Moxa Tech Note
I/O Data Mapping Configuration for
Moxa MGate 5105-MB-EIP
Copyright © 2013 Moxa Inc
Released on November 15, 2013
About Moxa
Moxa manufactures one of the world’s leading brands of device ne
tworking solutions. Products include serial
boards, USB
-to-serial hubs, media converters, device servers, embedded computers, Ethernet I/O servers,
terminal servers, Modbus gateways
, industrial switches, and Ethernet-to-fiber converters.
Our products are key
components of many networking applications, including industrial automation, manufacturing, POS, and medical
treatment facilities.
How to Contact Moxa
Tel :
+886-2-8919-1230
Fax:
+886-2-8919-1231
Web:
www.moxa.com
Email
: info@moxa.com
I/O Data Mapping Configuration for Moxa MGate
5105-MB-EIP
Moxa Technical Support Team
support@moxa.com
Contents
1. Introduction ............................................................................. 1
2. Applicable products .................................................................. 2
3. System requirements ................................................................ 2
4. System overview ...................................................................... 2
5. Moxa’s device configuration ..................................................... 2
5.1. Device configuration with MGate Manager ............................................. 2
6. I/O Data Mapping configuration ............................................... 7
6.1. I/O Data Mapping configuration via Web Console .................................. 7
1. Introduction
This document describes how to configure I/O Data Mapping for the Moxa MGate
5105-MB-EIP gateway. Although the Moxa MGate 5105-MB-EIP can perform I/O
Data Mapping automatically, there may be occasions for manual configuration.
Moxa Tech Note
I/O Data Mapping Configuration for
Moxa MGate 5105-MB-EIP
Copyright © 2013 Moxa Inc.
Page 2 of 8
2. Applicable products
Product Line Model Name
MGate 5000 series
MGate 5105-MB-EIP、MGate 5105-MB-EIP-T
3. System requirements
Description Model / File Name Version
Moxa EtherNet/IP to Modbus gateway MGate 5105-MB-EIP 1.1
Software utility to configure Moxa device MGate Manager 1.8
Modsim32 4.A00
4. System overview
This document will use the MGate 5105-MB-EIP to demonstrate how to configure I/O
Data Mapping. The system architecture is shown below.
5. Moxa’s device configuration
5.1. Device configuration with MGate Manager
5.1.1. Start MGate Manager and Search for the Moxa MGate 5105-MB-EIP.