STM32G0C1E-EV Evaluation board

with legacy peripheral daughterboard

STM32G0C1E-EV Evaluation board

with USB-C

and Power Delivery

daughterboard

Pictures are not contractual.

Features

Mother board

• STM32G0C1VET6 Arm

Cortex

-M0+ core-based microcontroller with

512 Kbytes of Flash memory and 144 Kbytes of RAM in LQFP100 package

• MCU voltage choice fixed at 3.3 V or adjustable from 1.65 V to 3.5 V

• I

C compatible serial interface

• RTC with backup battery

• 8-Gbyte or more SPI interface microSD

™

card

• Potentiometer

• 4 color user LEDs and one LED as MCU low-power alarm

• Reset, Tamper, and User buttons

• 4-direction joystick with selection button

• Board connectors:

– 5 V power jack

– RS-232 and RS485 communications

– CAN FD

– Stereo audio jack including analog microphone input

– microSD

™

card

– Extension I

C connector

– Motor-control connector

– Daughterboard connectors for legacy peripheral daughterboard or USB-C

and Power Delivery daughterboard

– Extension connectors for daughterboard or wire-wrap board

• Flexible power-supply options:

– 5 V power jack

– ST-LINK/V2-1 USB connector

– Daughterboard

• On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration

capability: Virtual COM port and debug port

• Comprehensive free software libraries and examples available with the

STM32CubeG0 MCU Package

• Support of a wide choice of Integrated Development Environments (IDEs)

including IAR Embedded Workbench

, MDK-ARM, and STM32CubeIDE

Legacy peripheral daughterboard

• IrDA transceiver

• IR LED and IR receiver

• Light-dependent resistor (LDR)

• Temperature Sensor

• Board connectors:

– Two HDMI connectors with DDC and CEC

– Smartcard slot

Product status link

STM32G0C1E-EV

Evaluation board with STM32G0C1VE MCU

STM32G0C1E-EV

Data brief

DB4305 - Rev 1 - October 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

USB-C

and Power Delivery daughterboard

• Muliplexor for first generation USB 3.1 Type-B receptacle / DisplayPort

™

input

and USB Type-C

port 1 output

• Multiplexor for USB Type-C

port 2 input and DisplayPort

™

output / USB 2.0

Type-A receptacle

• VCONN on USB Type-C

port 1

• USB PD on USB Type-C

port 1

• Board connectors:

–

USB Type-C

port 1 DRP (dual-role port) and USB 2.0 FS data

–

USB Type-C

port 2 sink

–

DisplayPort

™

input

–

DisplayPort

™

output

– First generation USB 3.1 Type-B receptacle, not installed by default

– USB 2.0 Type-A receptacle, not installed by default

– 19 V power jack for USB PD

Description

The STM32G0C1E-EV Evaluation board is a high-end development platform for the

STM32G0C1VET6 microcontroller operating at up to 64 MHz frequency with internal

512-Kbyte Flash memory, 144-Kbyte RAM, USB 2.0 FS device and host, two

CAN FDs, USB Type-C

, and Power Delivery controller interfaces (UCPD) compliant

with USB Type-C

r1.2 and USB PD specification r3.0, three I

Cs, three SPIs, six

USARTs, two low-power UARTs, one 12-bit ADC, two 12-bit DACs, three general-

purpose comparators, seven general-purpose timers, two low-power timers, HDMI

CEC, and SWD debugging support.

The full range of hardware features on the STM32G0C1E-EV Evaluation board

includes the mother board, the legacy peripheral daughterboard, and the USB-C

and Power Delivery daughterboard, which help to develop applications, and evaluate

all peripherals, such as USB Type-C

connector with USB PD, motor control

connector, CAN FD, USB 2.0 FS, RS-232, RS-485, audio DAC, microphone ADC,

TFT LCD, IrDA, IR LED, IR receiver, LDR, microSD

™

card, CEC on two HDMI

connectors, Smartcard slot, RF EEPROM, and temperature sensor.

The board integrates an ST-LINK/V2-1 as an embedded in-circuit debugger and

programmer for the STM32 MCU.

The daughterboard and extension connectors provide an easy way to connect a

daughterboard or wrapping board for the user's specific application.

The USB-C

and Power Delivery daughterboard features two independent USB-C

ports controlled by STM32G0. USB-C

port 1 is dual role power (DRP) and can

provide up to 45 W of power. USB-C

port 2 is sink only. Both support the USB PD

protocol and the alternate mode functionality.

Application firmware examples are provided to evaluate USB-C

technology through

various use cases.

STM32G0C1E-EV

DB4305 - Rev 1

page 2/6