- 2 -

Overview

Welcome to Moxa’s NPort 5400 Series, a 4 port communication device

that allows you to control RS-232 (for NPort 5410), RS-422/485 (for

NPort 5430/5430I) or RS-232/422/485 (for NPort 5450/5450I) serial

devices over a TCP/IP based Ethernet. Besides, NPort 5450-T and NPort

5450I-T are designed to use in wide temperature environment.

NPort 5400 Series is a Moxa Green Product. Moxa’s Green Products

satisfy the RoHS directive of the European Parliament, and accordingly,

do not contain cadmium and cadmium compounds, hexavalent

chromium compounds, lead and lead compounds, mercury and mercury

compounds, PBBs (polybrominated biphenyls), or PBDEs

(polybrominated diphenyl ethers).

Package Checklist

Before installing NPort 5400, verify that the package contains the

following items:

• 1 NPort 5400 4-port Serial Device Server

• Power adapter (Sold separately for the NPort 5450-T and 5450I-T)

• Power jack to 3-pin terminal block adapter

• Wall mount kit

• Quick Installation Guide

• Warranty card

Optional Accessories

• DK-35A For 35 mm DIN-Rail; includes 4 screws

NOTE

Notify your sales representative if any of the above items is

missing or damaged.

NOTE

The operating temperature of the power adapter (if applicable)

in the box is from 0 to 40°C. If your application is out of this

range, please use a power

adapter supplied by UL Listed

External Power Supply

(The power output meets SELV and LPS

and is rated 12 to 48 VDC; the minimum current is 92.4 mA).

Hardware Introduction

As shown in the following figures, NPort 5410 has 4 Male DB9 ports, for

the RS-232 interface, NPort 5430/5430I has 4 5-pin terminal blocks, for

the RS-422/485 interface, and NPort 5450/5450I has 4 Male DB9 ports,

for the RS-232/422/485 interface.