Force

WIKA data sheet FO 51.36

WIKA data sheet FO 51.36 ∙ 10/2020 Page 1 of 6

Data sheets showing similar products:

Compression force transducer, model F1861; see data sheet FO 51.61

Applications

■

Weighing, dosing systems, silo weighing

■

Production lines

■

Testing and production plants

■

Truck scales

Special features

■

Measuring ranges 0 ... 7.5 t to 0 ... 300 t

■

For compression forces

■

Ingress protection IP68, hermetically sealed

■

Relative linearity error from 0.0166 % F

nom

Description

The model F1270 high-capacity load cell is available with

rated loads of 7.5 t to 300 t and has been specially developed

for application in container and silo weighing technology.

It is also suitable for use in harsh industrial applications and

in the construction of testing and production plants, where

robustness and long-term stability are required.

With its special geometry this high-capacity load cell is

excellently suited for installation in truck scales. Here it

automatically aligns itself in such a way that there is no need

for complex and precise positioning of the vehicle on the

weighing platform.

The use of stainless steel, the welded cover of the strain

gauge measuring elements and a glass feed-through for the

cable connection allow trouble-free use even under unfavour-

able ambient conditions.

Due to the integrated radii of the load supports, the instal-

lation can be carried out with simple force introduction

elements.

Options

■

Integrated surge arresters (4 x)

■

Accessory mounting kits

High-capacity load cell, model F1270

High-capacity load cell up to 300 t

Model F1270

WIKA data sheet FO 51.36 ∙ 10/2020 Page 2 of 6

Specications per VDI/VDE/DKD 2638

Model F1270

Rated load F

nom

7.5 ,15 , 22.5, 30, 40, 50 t 100, 150, 300 t

Relative linearity error d

lin

±0.0166 % F

nom

±0.04 % F

nom

Relative repeatability error in unchanged

mounting position b

±0.0166 % F

nom

±0.04 % F

nom

Relative deviation of zero signal d

S, 0

±5 % F

nom

Relative creep, 30 min. ±0.0166 % F

nom

±0.06 % F

nom

Temperature eect on zero signal TK

≤ ±0.0093 %/10 K ≤ ±0.04 %/10 K

Temperature eect on characteristic value

≤ ±0.01 %/10 K ≤ ±0.02 %/10 K

Force limit F

200 % F

nom

Breaking force F

> 300 % F

nom

Material of the measuring body Stainless steel

Rated temperature range B

T, nom

-10 … +40 °C

Operating temperature range B

T, G

-40 … +80 °C

Output signal (rated characteristic value)

nom

2.00 ±0.1 % mV/V

Input resistance R

1,150 ±50 Ω

Output resistance R

1,000 ±2 Ω

Insulation resistance R

> 5 GΩ

Electrical connection 4-pin, shielded cable (cable sheath made of polyurethane)

■

7.5 to 22.5 t: AWG 24 (cable length 12 m, Ø 5 mm)

■

30 and 40 t: AWG 24 or AWG 20 (cable length 18 m, Ø 7.8 mm)

■

from 50 t: AWG 20 (18 m)

Voltage supply

without amplier DC 5 ... 15 V for mV/V output

with integrated amplier DC 12 … 28 V for output 0(4) … 20 mA, DC 0 … 10 V

with cable amplier

Ingress protection (per IEC/EN 60529) IP68 (down to 2 m water depth) / IP69K

Encapsulation Completely hermetically sealed

Cable connection by means of a glass feed-through

Rated load - weight in kg

7.5 t 1.3 kg

15 t 1.4 kg

22.5 t 1.5 kg

30 t 3.4 kg

40 t 3.6 kg

50 t 4.5 kg

100 t 12.9 kg

150 t 17.1 kg

300 t 32.8 kg

Logo Description Country

EU declaration of conformity

■

EMC directive

■

RoHS directive

European Union

EAC

■

EMC directive

Eurasian Economic Community

Approvals