1
Wall Mounting Multiple Color LED Steady/ Flashing Signal Lights
SWTC/ SWTCE
5030
55
90d
B
Model number
Voltage Current
Certicate
Weight
Color
SWTCL
Steady
SWTCLF
Steady/ Flashing
SWTCEL
Steady
SWTCELF
Steady/ Flashing
DC12V-24V Max.0.445A
0.31kg
R-Red
A-Amber
G-Green
AC110V 0.075A
0.46kg
AC220V 0.035A
SWTCL - BZ - 3 - 220 - RAG
[Model
number]
[Buzzer] [Colors] [Voltage] [Color]
| | | | |
• SWTCL
• SWTCLF
• SWTCEL
• SWTCELF
• (Blank)
- No buzzer type
• BZ
- Built-in buzzer type
• 2-2colors
• 3-3colors
• 12/24 - DC12V-24V
• 110 - AC110V
• 220 - AC220V
• RAG-
Red/ Amber/ Green
• RG-
Red/ Green
Please scan the QR
code for more
detailed
product information.
www.qlight.com
• Built-in buzzer : Max.90dB at 1m
• Protection rating : IP55
• Ambient operating temperature : -30°C to +50°C
※
CE compliant
: DC24V
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specication.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. During wiring or maintenance, please completely turn o the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, re, electric shock and loss of life.)
Ordering Specications
Product Specications
2
Dimensions
(Units : mm)
Ø12 CABLE ENTRY
216
90
46
33
74
83
150
11
108
46
92
SWTC/ SWTCE
4-Ø4.2 HOLES
R47
External contact Transistor
DC
Steady
DC
Steady/
Flashing
•
SWTC
series can be wired with either external contact or transistor.
• When using a transistor, please choose between the NPN transistor or PNP transistor which best matches the voltage and product type,
then connect them correctly according to the wiring diagram below.
• Product can be wired regardless of polarity.
SWTC(E)L-DC
EXTERNAL CONTACT
EXTERNAL CONTACT
EXTERNAL TRANSISTOR-NPN
EXTERNAL TRANSISTOR-NPN
EXTERNAL TRANSISTOR-PNP
Red
Amber
Green
Brown
Black
Red
Amber
Green
Brown
Black
Red
Amber
Green
Brown
Black
Red
Amber
Green
Red
Amber
Green
Red
Amber
Green
Red
Amber
Green
Brown
Gray
Black
White
Black
Red
Amber
Green
Brown
Black
Gray
White
Black
Red
Amber
Green
Red
Amber
Green
Red
Amber
Green
Buzzer
Buzzer
Buzzer
Buzzer Buzzer
Power
Power Power
PowerPower
Common
Common
Common
Common
Steady
Steady
Steady
Flash
Flash
Steady
Steady
Fuse
Fuse
Fuse
Fuse Fuse
SWTC(E)LF-DC
SWTC(E)L-DC
SWTC(E)LF-DC
Wiring Instructions