ISET S.r.l.
Sede Legale e Uffici
Via Donatori di sangue, 9 - 46024 Moglia (MN)
Tel. e fax +39 (0)376 598963
iset@iset-italia.com www.iset-italia.eu
Cap. soc. i.v.
Cod. Fisc. e P.IVA
Reg. Imprese
REA
€
10.200,00
02 332 750 369
02 332 750 369
MN 0221098
CERTIFICATE OF COMPLIANCE
Certificado de Conformidade - Сертификат соответствия - Konformitätserklärung
1) APPLICANT: 2)
QLight Co., Ltd
185-25,Mukbang-Ro,Sangdong-Myeon,Gimhae-Si,
Gyeongsangnam-Do,Korea
CERTIFICATE NO.:
IT061602QL170927
TEST REPORT(S)
NO.:
BST1709809140001SR-2
BST1709809140001Y-ER-1/2
Shenzhen BST Technology Co.,Ltd
3) WITH REFERENCE TO EC DIRECTIVE APPLIED: 4) CERTIFICATION ISET MARK:
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
HARMONIZED STANDARDS APPLIED:
EN 60598-1: 2015,EN 55015: 2013+AL,
EN61547:2009,EN61000-6-4:2007+A1:2011,
EN61000-6-2:2005,EN62493:2015
5) PRODUCT CHARACTERISTICS: LED Steady/Flashing Tower Light
MODEL(S): STG50L(F)-BZ-5-DC24V-RAGBW, STG50L(F)-5-DC24V-RAGBW
STG50ML(F)-BZ-5-DC24V-RAGBW, STG50ML(F)-5-DC24V-RAGBW
STG40L(F)-BZ-5-DC24V-RAGBW, STG40L(F)-5-DC24V-RAGBW
STG40ML(F)-BZ-5-DC24V-RAGBW, STG40ML(F)-5-DC24V-RAGBW
REMARK: The verification has been carried out on voluntary application of the manufacturer based only on the
documents prepared and provided by the manufacturer itself. The product(s) satisfies the requirements of the
Certification Mark of ISET according to the ISET regulations. The manufacturer is responsible to maintain the
internal production control to ensure the compliance of the product. ISET declines any liability with reference to any
other noncompliance of documents, product or test report that have been submitted to evaluation. However
marking and EC declaration are duties of the manufacturer before putting into service of its product(s) on market as
well as the verification doesn’t imply assessment of the production of the product(s).The manufacturer is liable to
take all the necessary actions required by the applicable directives&procedures before putting CE mark on the
product(s).The manufacturer should be responsible for the results caused by improperly use this verification.
6) DATE OF ISSUE: 27/09/2017 DATE OF EXPIRE: 26/09/2022
CERTIFICATION MANAGER: