Product: OWL 4G Australia + WLAN
LTE Ethernet Gateway, Australia, New Zealand, WLAN, VPN, GPS, Dual SIM,
Serial, IO, Vehicles (E-Mark)
Product Description
Industry 4.0 and Industrial IoT Cellular Router and Gateway. Optimized for 4G applications with edge pre-computing. 11ac Wave 2 WLAN, GPS, VPN and
openly programmable and extendable Linux. Rugged and approved for vehicles.
Technical Specifications
Product description
Type: OWL-L04.01-W04.01-F02-U01-A02-VXX.X.XX
Name: OWL 4G Australia + WLAN
Description:
Industry 4.0 and Instustrial IoT Cellular Router and Gateway. Optimized for 4G distributed applications with edge pre-computing. VPN and open extendable Linux. Integrated
WLAN 802.11ac.
Part Number: 942285101
Availability: Available
Port type and quantity: 2x Ethernet, 2x Antenna, 1x GPS, 2x SIM, 1x Power, 2x I/O, 2x Serial, 2x WLAN
Serial: On 10-pin panel socket (connector included): RS485, RS232 , Serial2TCP , Serial2UDP
Radio protocol: IEEE 802.11ac Wave 2 (2x2 MIMO), 802.11d, 802.11e, 802.11h, 802.11i, 802.11r
Country certification: Australia, New Zealand
Processor: ARMv7
Hard disk space: Flash memory (512MB User data storage, 830MB User module storage)
RAM: 512MB
More Interfaces
SIM Cards: 2x 2FF (3V, 1.8V), only one active at a time, can be configured independently, automatic switch on connection failure
Ethernet: 2x Ethernet: 10/100 Mbit/s (RJ45)
Power Supply: Via 2-pin terminal block 3.5mm (included)
Signaling contact: On 10-pin panel socket (connector included): Digital Input, Digital Output
Radio technology
Antenna connector: 3 x SMA Female (Cellular, Diversity, GPS), 2x RP-SMA Female (WLAN)
Frequency band:
GPRS/EDGE (2G): 800/900/1800/1900 MHz, TD-SCDMA: 850/900/1900/2100 MHz, UMTS/HSPA+ (3G): 850(Band 5) / 900(Band 8) / 1900(Band 2) / 2100(Band 1), LTE (4G):
700(Band 28) / 850(Band 5) / 900(Band 8) / 1700(Band 4) / 1800(Band 3) / 1900(Band 2) / 2100(Band 1) / 2600(Band 7)
Transmission rate: LTE Category 4: 150Mbps Download, 50 Mbps Upload
Additional radio features: GNSS (GPS, GLONASS)
Power requirements
Current consumption: Idle 2.5 W, Average 4 W, Maximum 11 W
Operating Voltage: 9 V DC to 36 V DC
Redundancy functions: Dual VRRPv2 (with ping probes), Dual VRRPv3 (with ping probes), multiple routed interfaces (ping monitoring, failover and load balancing), PPPoE bridge mode
Diagnostics features
Modules and components: User modules pre-installed: GPS, User modules as separate downoad: Lua, Python
Monitoring: Syslog (UDP) , SNMPv1/2c/3
Security features
Authentication: User Management (local, RADIUS, TACACS+, mixed)
Stateful inspection firewall: Static Firewall IPv4/IPv6 with Incoming and Forwarding Ruleset, DoS protection
Service
Other services:
DHCP Server (IPv4/IPv6, dynamic and static leases, IPv6 Prefix Delegation, DNS proxy) , DynDNS client , PPPoE , FTP server , E-Mail via SMTP , SMS (notifications and
commands) , Telnet server
Software
Operating system: Custom embedded Linux with Busybox Shell
VPN: OpenVPN, IPSec, GRE, L2TP, PPTP
Switching: VLAN (via Scripting), tunneled VLANs (via Scripting) , IGMP
Management: HTML5, SSH, SNMPv1/2c/3, Automatic configuration and firmware fetch from a web- or ftpserver, backup and restore with drag & drop
Diagnostics: One click support report package, System log, Linux kernel log, reboot log, signal strength history (60 days), SSH linux shell, Signal strength LED indicators
Configuration: Simple to edit text file configuration, HTTP, HTTPs, SMS, SSH, Telnet, 4 Configuration Profiles, automatic via web/ftp, SNMPv1/2c/3
Security: HTTPs, SSH, Authentication with RADIUS or TACACS+, activate cellular interface with SMS, Ethernet 802.1X (EAP-PEAP/MsCHAPv2 or EAP-TLS)
Time synchronisation: SNTP Client, SNTP Server , Battery for RTC (CR1225), GPS
Routing: Static unicast routing, Multinetting, IP masquerading, Port forwarding, Multiple routes with priority and load sharing, 1:1 NAT
Dynamic routing: Dual VRRPv2 (with ping probes), Dual VRRPv3 (with ping probes), multiple routed interfaces (ping monitoring, failover and load balancing)
Ambient conditions
MTBF (MIL-HDBK-217F-2,
parts count):
55.2 Years
Degree of Protection when
Installed:
IP30
Operating temperature: -40-+65 °C
Storage/transport
temperature:
-40-+85 °C
Relative humidity
(non-condensing):
0-95 %
Mechanical construction
Dimensions (WxHxD): 145x32x105 mm
Weight: 520 g
Housing: Metal
Mounting: DIN Rail and Wall mounting
Protection class: IP30
Approvals
Safety of industrial control
equipment:
UL/EN/AS/NZS 62368-1:2014 (formerly EN 60950-1)
Transportation: E8 (vehicles) , EN 45545-1 (fire) , EN 45545-2 HL1/HL2/HL3
Radio: AS/NZS CISPR 32:2015, AS/CA S042:2018 + AS/CA S042.1:2018, AS/CA S042:2018 + AS/CA S042.4:2018
WLAN Access Point
Access Point Functionality:
Yes, open and secured (WEP, WPA-PSK, WPA-Enterprise, WPA2-PSK, WPA2-Enterprise, 802.1X - Radius with EAP-PEAP/MsCHAPv2 or EAP-TLS), AP and Client function
can be used in parallel (only on the same channel, AP channel takes priority)
Number of SSIDs: 1
Max. Number of Connected
Clients:
50
WLAN Client
Client / STA Functionality:
Yes, open and secured (WEP, WPA-PSK, WPA-Enterprise, WPA2-PSK, WPA2-Enterprise, 802.1X - Radius with EAP-PEAP/MsCHAPv2 or EAP-TLS), AP and Client function
can be used in parallel (only on the same channel, AP channel takes priority)
Scope of delivery and accessories
Accessories:
942042105 Indoor LTE Antenna , 942042108 Indoor GPS antenna , 942117001 50Ohm terminator for cellular antenna , 943981015 2x2 WLAN Through-hole antenna ,
943662015 Rail Power Supply
Scope of delivery: Device, DIN rail clip, wall mount wings, 2-pin power connector, 10-pin connector for I/O and RS232/RS485
Further Instructions
Product Documentation: https://www.doc.hirschmann.com