Ver.1.02
CX-100n-DC5311-C02 1
CX100n Series
cTEST Controller
CX-100n-DC5311-C02
Model CPU Memory
Pre-installed OS
(storage device)
CX-100n-DC5311-C02
Intel Atom
Processor N270
(1.60GHz)
1GB
Windows Embedded
Standard (Japanese version),
(4GB CF)
* Registered Trademark Pending
Specifications, color and d esig n of the products are subject to
change without notice.
This product is a multi-signal I/O computer for a
Windows-based testing and measurement system.
It provides advanced synchronization processing features
along with the analog I/O, digital I/O, and counter input features
equivalent to the CONTEC's measur ement control boar ds
AIO-163202F-PE, DIO-1616L-PE, and CNT-320 4MT-LPE
respectively, and is best for applications such as data collection
from various sensors/devices and controlling them. Its Intel
(R) Atom (TM) processor realizes low power consumption while
securing sufficient performance, enabling a space-saving
design so as to be installable in an area size of A4 size or less
and a low height of 50 mm*1.
The “signal designer" in this pr oduct handles hardware
processing and consolidated controls of events such as
operation start/stop triggers and sampling clock of signal I/O
features, realizing high-level sync hronizati on process ing that
cannot be implemented in high-level language programming
that utilizes commodity PC and one or more expansion boar ds.
*1 installed vertically
Intel, Intel Atom, Intel Core and Celeron are registered trademarks of
Intel Corporation. MS, Microsoft and Windows are trademarks of
Microsoft Corporation. Other brand and product names are
trademarks of their respective holder.
Cost Reduction of Testing Measurement System.
Equipped with Measurement Con t rol Devic es.
Features equivalent to three high-performance interface
boards for measurement control are integrated to this size.
This product alone is sufficient for performing of measurement
control, such as voltage measurement and position control.
- Analog I/O (equivalence to AIO-163202F-PE): 16bit Analog
input 32channels, 16bit Analog output 2chan nels, etc
- Digital I/O (equivalence to DIO-1616L-PE): 16channels
Optocoupler isolated input, 16channels Optocoupler isolated
open collector output
- Counter input (equivalence to CNT-3204MT-LPE): 32bit
A/B/Z-phase, Up down counter 4channels
The product has the hardware synchronization control
feature called “Signal Designer” that ensures detection of
test object characteristi cs.
The “signal designer” in this
product handles hard ware
processing and consolidated
controls of events such as
operation start/stop triggers
and sampling clock of signal
I/O features. This enables
high-level synchronization
processing that cannot be
implemented in high- level language programm ing that utilizes
commodity PC and one or more e xpansion boards.
Serving the downsizing of equipment, a small footprint
design for A4-sized or smaller in stallation area
The product adopts space-saving design for A4-sized or
smaller installation area 182(W ) x 270(D) x 35(H), permitting
placement with opening of onl y 50mm*1. It largely serves
downsizing of your equipm ent, fits any area with the
aestheticness kept. The accompanying support stand allows
vertical placement, consuming smaller footprint on your desk.
It is also possible to attach to the VESA standard 75 x 75, 100 x
100mm using the optional fittings.
*1 installed vertically
Contributing to reduction of running cost and promotion
of energy efficiency
It adopts the low-power platform with Intel (R) Atom(TM)
Processor N270 1.60GHz (FSB 533MHz), 945GSE and
ICH7M-DH chipset that realizes lower power consumption
while ensuring sufficient perform ance.
Slitless/fanless design that reduces m aintenance work
It employs slitless/fanless designing ac hieved by the
elimination of radiating slit an d CPU fan. It is free from dusts
and foreign objects, and the use the parts that degrades over
the years is avoided in most case, resulting in drastic
alleviation of the maintena nce burden.
Remote power management function to reduce operation
tasks
This product supports timed/automated system start-up
(Resume By Alarm). For example, it enable s unattended
operation, such as starting to show information of an
establishment in unison at opening time. Also, it supports
system start-up externally via network (Wake On LAN) and
modem (Power On by Ring). It encourages significant labor
saving in operation.
Falling-off prevention tools and fixing clamps provided to
avoid trouble caused by disconnected cable
This product stays trouble-free, being equipped with USB
removal prevention fitting and cable clamp for connectors with
no locking mechanism, such as USB cable, and with hardware
to properly mount and avoid falling out of CF card.
Features
Ver.1.02
CX-100n-DC5311-C02 2
Major types of peripherals are supported with rich
interfaces including the two CF card slots
It has a variety of extended interface such as 1000BASE-T x 2,
USB2.0 x 4, serial (RS-232C x 2). It has 2 CF card slots that
can use for OS and data. They are very useful because you
can use one slot for system start-up and the other for
maintenance, system log, or taking away the collected d ata.
Safety design required for embedded applications
Retention of CMOS data by EEPROM allows the system to
start up even when the battery has run out. Additi onally,
Windows Embedded Standard installed model realizes totally
spindleless design with CF card adopted for the storage. It
can utilize EWF feature of OS*2 that protects CF card from
unnecessary write, i.e. relieves concern about the limitation of
number of writes to CF card, and that prevents system from
unintentional modification, as a result of consideration for
reassurance in designin g necessary for the purpose of
embedding.
*2 EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that
protects the disk from being actually written by redirecting the writing to RAM.
Expandable with PCI boards and/or PCI Express board s
PC boards and PCI Express boards can be added by using, for
example, a separately or optionally available cable and a PCI
Express Cable-based expansion chassis. It can be expanded
with up to thirteen expansion board.
A wide range of power supplie s (10 .8 - 31.2 VDC) supported
As the product supports a wide range of power (10.8 -
31.2VDC), it can be used in a variety of power environments.
Windows Embedd ed Standard
< 1 / 2 >
Item Specification
CPU Intel(R) Atom(TM) Processor N270 1.60GHz (FSB533MHz)
Chip set Intel(R) 945GSE + ICH7M-DH
BIOS BIOS (mfd. by Award)
Memory 1GB, 200pin SO-DIMM socket x 1,
PC2-4300 (DDR2 533) DDR2 SDRAM support
Controller Built in Intel 945 GSE
Video RAM Main memory shared
Video BIOS 64KB(C0000H-CFFFFH)
Video
Display I/F DVI-I I/F x 1(29 pin connector x 1)
DVI 640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 600,
1,280 x 720, 1,280 x 768, 1,280 x 960, 1,280 x 1,024, 1,360 x 768,
1,400 x 1,050, 1,600 x 900, 1,600 x 1,200, 1,856 x 1,392,
1,920 x 1,080, 1,920 x 1,200 (16,770,000 colors)
System
resolution
Analog RGB 640 x 480, 800 x 600, 1,024 x 768, 1,280 x 768, 1,280 x 1,024,
1,360 x 768, 1,400 x 1,050 (16,770,000 colors)
Audio AC97 compliant
LINE OUT :
φ3.5 Stereo mini jack
Full-scale output level 1.5Vrms (Typ.),
Dual 50mW Amplifier
MIC IN : φ3.5 Stereo mini jack
Full-scale input level 1.3Vrms (Typ.)
Serial A TA I/F None
CF CARD Type I x 2 bootable CF card slot
CF1 is finished mounting CF (4GB, 1 partition) *1
Serial I/F RS-232C (general-purpose) : 2 channels (SERIAL PORT1, 2)
9pin D-SUB connector (male)
Baud rate : 50 - 115,200bps
I/F 1000BASE-T/100BASE-TX/10BASE-T
RJ-45 connector x 2 (Wake On LAN support)
LAN
Controller Intel 82573L Controller
USB I/F 4 channels (USB 2.0-compliant)
Keyboard/mouse I/F None *2
General-purpose I/O None
RAS function None
PCI Express cable PCI Express 1.0a(x1) standard port
(18-pin PCI Express External Cabling connector x 1)
Analog I/O equivalent
to AIO-163202F-PE *3
Analog input : Single-end input 32channels, 16bit,
2μsec/ch (Max.)
Analog output : 2channels, 16 bit, 10μsec (Max.)
Digital I/O : 8channels for each, LVTTL
Counter : 2channels, 32bit up count, 10MHz (Max.)
< 2 / 2 >
Item Specification
Digital I/O equivalent to
DIO-1616L-PE *4
Digital input : 16channels Optocoupler isolated input 12 - 24VDC,
corresponding to current sink output
Digital output : 16channels Optocoupler isolated open collector
output, current sink output
Counter input
equivalent to
CNT-3204MT-LPE *5
4channels, LVTTL, 32bit up down counter, 10MHz (Max.)
2-phase / single-phase / single-phase input with gate control
Hardware monitoring Monitoring CPU temperature, board temperature, power voltage
Watch dog timer Software programmable, 255 level (1sec - 255 sec)
Causes a reset upon time-out.
RTC/CMOS Lithium backup battery life : 10 years or more
The real-time clock is accurate within ±3 minutes (at 25°C) per
month (ICH7 integrated RTC).
Power Management
Power management setup via BIOS
Power On by Ring / Wake On LAN
Supports PC98/PC99 ACPI Power management
Rated input
voltage
12 - 24VDC *6
Range of
input voltage
10.8 - 31.2VDC
Power
consumption
12V 4.0A (Max.), 24V 2.0A (Max.)
Power
supply
External
device
power
supply
capacity
- CF card slot +3.3V : 1A (500mA x 2)
- USB I/F +5V : 2A (500mA x 4)
Physical dimensions
(mm)
182 (W) x 270 (D) x 35(H) (No protrusions)
Weight About 2.1kg
*1 : The capacity of CF is a value when 1GB is calculated by 1 billion bytes. The capacity
that can be recognized from OS might be displayed fewer than an actual value.
*2 : Use USB I/F for the keyboard / mouse.
*3 : For more details on this, ref er to the manual for CONTEC’s analog I/O board
AIO-163202F-PE.
*4 : For more detail s on this, refer to th e manual for CONTE C’s digital I/O b oard
DIO-1616L-PE.
*5 : For more detail s on this, refer to the manual for CONTEC ’s up down cou n ter board
CNT-3204MT-LPE.
*6 : Use a power cable shorter than 3m.
Item Specification
Operating
temperature *7
0 - 50°C *8
Storage temperature -10 - 60°C
Humidity 10 - 90%RH (No condensation)
Floating dust p articles Not to be excessive
Corrosive gases None
Line noise
AC line / ±2kV *9,
Signal line / ±1kV
(IEC61000-4-4 Level 3,EN61000-4-4 Level 3)
Line-noise
resistance
Static
electricity
resistance
Contact discharge / ±4kV
(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Atmospheric discharge / ±8kV
(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz / semi-amplitude 0.15 mm 57 - 150Hz/2.0G
40 min. each in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
Impact resistance
10G, half-sine shock for 11 ms in x, y, and z directions
(JIS C60068-2 -27-compliant, IEC6 0068-2-27-comp liant)
Ambient
specifications
Grounding
Class D grounding (previous class 3 grounding),
SG-FG / continuity
*7 : For more details on this, please refer to chapter 3, “Installation Requirements”.
*8 : To use 1000BASE-T, you should keep its ambient temperature between 0 - 45°C.
*9 : When AC/DC power un it “LDA100W-24-SN, LDA100W-12-SN” (by Cosel) is u s ed.
AC adapter
IPC-ACAP12-04 AC adapter (Input: 100-240VAC,
Output: 12VDC 4A)
Bracket
BX-BKT-VESA02 Bracket for VESA(“75 x 75”, “100 x 100”)
CF Card
CF-1GB-A 1GB CompactFlash for Fix Disk
CF-2GB-A 2GB CompactFlash for Fix Disk
CF-4GB-A 4GB CompactFlash for Fix Disk
CF-8GB-A 8GB CompactFlash for Fix Disk
Functional Specification
List of Options
Supported OS
Installation Environment Requirements