SBR10100
Document number: DS30961 Rev. 12- 2
1 of 5
www.diodes.com
April 2016
© Diodes Incorporated
SBR10100CT
SBR10100CTFP
10A SBR
®
SUPER BARRIER RECTIFIER
Product Summary
V
RRM
(V)
I
O
(A)
V
F
Max (V)
@ +25°C
I
R
Max
(mA)
@ +25°C
100
5 (Per leg)
10 (Total)
0.8
0.1
Description
The SBR10100CT & SBR10100CTFP provide very low V
F
and
excellent reverse leakage stability at high temperatures.
Applications
It is ideal for use as a rectifier, freewheel diode or blocking diode in:
DC-DC Converters
AC-DC Adaptors
Features and Benefits
Patented SBR
®
technology provides superior avalanche
capability versus Schottky diodes, ensuring more rugged and
reliable end applications.
Reduced ultra-low forward voltage drop (V
F
); Better efficiency
and cooler operation.
Reduced high-temperature reverse leakage; Increased reliability
against thermal runaway failure in high-temperature operation.
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Mechanical Data
Case: TO-220AB, ITO-220AB
Case Material: Molded Plastic; UL Flammability Classification
Rating 94V-0
Terminals: Matte Tin Finish Annealed over Copper Leadframe.
Solderable per MIL-STD-202, Method 208
Weight: TO-220AB – 1.85 grams (Approximate)
ITO-220AB – 1.65 grams (Approximate)
Ordering Information (Notes 4 & 5)
Part Number
Case
Packaging
Pb
SBR10100CT
TO-220AB
50 pieces/tube
Green
SBR10100CT-G
TO-220AB
50 pieces/tube
Pb
SBR10100CTFP
ITO-220AB
50 pieces/tube
Green
SBR10100CTFP-G
ITO-220AB
50 pieces/tube
Pb
SBR10100CTFP-JT
ITO-220AB (Alternate)
50 pieces/tube
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For Green Molding Compound version part numbers, add "-G" suffix to part number above. Examples: SBR10100CT-G.
5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
Package Pin-Out
Configuration
TO-220AB
Top View
ITO-220AB
Top View
TO-220AB
Bottom View
ITO-220AB
Bottom View
SBR10100CT = Product Type Marking Code
AB = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 15 = 2015)
WW = Week (01 - 53)
SBR10100CTFP = Product Type Marking Code
AB = Foundry and Assembly Code
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 15 = 2015)
WW = Week (01 - 53)
YYWW AB
SBR10100CTFP
SBR10100CT
YYWW AB
SBR is a registered trademark of Diodes Incorporated.
SBR10100
Document number: DS30961 Rev. 12- 2
2 of 5
www.diodes.com
April 2016
© Diodes Incorporated
SBR10100CT
SBR10100CTFP
Maximum Ratings (@T
A
= +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
RM
100
V
Average Rectified Output Current (@ T
C
= +115°C)
I
O
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I
FSM
120
A
Peak Repetitive Reverse Surge Current (2μS-1kHz)
I
RRM
2
A
Isolation Voltage (ITO-220AB Only)
From Terminal to Heatsink t = 3 sec
V
AC
2,000
V
Thermal Characteristics
Characteristic
Symbol
Value
Unit
Typical Thermal Resistance (per leg)
Package = TO-220AB (Note 7)
Package = ITO-220AB (Note 7)
R
θJC
2
4
°C/W
Operating and Storage Temperature Range
T
J
, T
STG
-65 to +150
°C
Electrical Characteristics (@T
A
= +25°C, unless otherwise specified.)
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Forward Voltage Drop
V
F
—
—
0.80
0.71
V
I
F
= 5A, T
J
= +25°C
I
F
= 5A, T
J
= +125°C
Leakage Current (Note 6)
I
R
—
—
100
15
µA
mA
V
R
= 100V, T
J
= +25°C
V
R
= 100V, T
J
= +125°C
Notes: 6. Short duration pulse test used to minimize self-heating effect.
7. Test with Aluminum heatsink 50 x 50 x 23 mm.