Description
The AH3360 is a high sensitivity micro power unipolar hall effect
switch IC with internal pull-up and pull-down capability. Designed for
battery powered consumer such as cellular phones and portable PCs
to home appliance and industrial equipment, the average supply
current is only 4.3µA at 1.85V. To support portable equipment, the
AH3360 can operate over the supply range of 1.6V to 3.6V, and uses
a hibernating clocking system to minimize the power consumption. To
minimize PCB space, the AH3360 is available in small and low profile
SOT553, X1-DFN1216-4 and X2-DFN2015-6 packages.
The output is activated with a south pole of sufficient magnetic field
strength. When the magnetic flux density (B) perpendicular to the
package is larger than operate point (B
OP
), the output will be turned
on (pulled low) and held until B is lower than release point (B
RP
). The
output will remain off when there is no magnetic field.
Features
Unipolar Operation (South Pole to Part Marking Side)
Supply Voltage of 1.6V to 3.6V
High Sensitivity
Micro Power Operation
Chopper Stabilized Design Provides:
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Physical Stress
No External Pull-Up Resistors Required
Good RF Noise Immunity
-40°C to +85°C Operating Temperature
High ESD Capability of 8kV Human Body Model
Small and Low Profile X1-DFN1216-4, X2-DFN2015-6 and
SOT553 Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
(Note 3)
Applications
Open and Close Detect for Cellular Phones
Holster or Cover Detect for Cellular Phones and Tablet PCs
Cover or Display Switch in Portable PCs
Digital Still, Video Cameras and Handheld Gaming Consoles
Docking Station Detect
Door, Lids and Tray Position Switches
Level, Proximity and Position Switches
Contact-Less Switches in Home Appliances and Industrial
Applications
2. See https://www.diodes.com/quality/lead-- and Antimony-free, "Green" and
3. Halogen- and Antimony-ne (<1500ppm total Br + Cl) and