Calibration

Page 1 of 13

WIKA data sheet CT 11.02

∙ 12/2019

Data sheets showing similar products and accessories:

Hand-held pressure indicator with reference pressure transducer (CPT6200); model CPH6200; see data sheet CT 11.01

Hand-held pressure indicator; model CPH6300; see data sheet CT 12.01

Hydraulic hand spindle pump; models CPP1000-M, CPP1000-L; see data sheet CT 91.05

Hand test pump, pneumatic; model CPP30; see data sheet CT 91.06

Calibration software; WIKA-Cal; see data sheet CT 95.10

for further approvals

see page 5

Intrinsically safe hand-held pressure indicator

Model CPH62I0-S1 (1-channel version)

Model CPH62I0-S2 (2-channel version)

Applications

■

Calibration service companies and service industry

■

Measurement and control laboratories

■

Pressure tests

Special features

■

Intrinsically safe indicator with interchangeable pressure

transducers model CPT62I0 (plug-and-play)

■

Measuring ranges 0 ... 14,500 psi (0 ... 1,000 bar)

■

Type of pressure: Positive and negative overpressure,

absolute pressure and dierential pressure

■

Accuracy: 0.2 %, optionally 0.1 % (incl. calibration

certicate)

■

Data logger for recording measured values

Description

Extensive application possibilities

For the hand-held pressure indicator model CPH62I0, external

reference pressure transducers of model CPT62I0 with

measuring ranges of up to 14,500 psi (1,000 bar) are available.

It is therefore particularly suitable as a test instrument for

applications such as process engineering, chemical industry,

reneries, etc. The digital indicator automatically detects the

measuring range of the connected pressure transducer and

guarantees a highly accurate pressure measurement.

Functionality

The CPH62I0 can be used for measuring both gauge and

absolute pressure. Dierential pressure measurement is

possible with the 2-channel version CPH62I0-S2, and two

connected model CPT62I0 reference pressure transducers.

Pressure units selectable on the instrument are: bar, mbar, psi,

Pa, kPa, MPa, mmHg or inHg.

An integrated data logger and various other functions such as

Min., Max., Hold, Tare, zero point adjustment, alarm, power-

o, peak value detection (1,000 measurements/s), mean

value lter, etc. ensure that the CPH62I0 can be used for many

dierent applications.

Software

In addition to the GSoft data logger evaluation software for

the tabular and graphical representation of the logger data,

WIKA-Cal calibration software for calibration tasks is also

available. WIKA-Cal also oers, over and above PC-supported

calibration, the management of the calibration and instrument

data in an SQL database. A USB interface is available for the

data transfer.

Hand-held pressure indicator model CPH62I0-S1 with

external reference pressure transducer model CPT62I0

∙ Page 2 of 13

Specications

Model CPH62I0 hand-held pressure indicator

Electrical connection for reference pressure transducer

Measuring inputs

■

1 input for CPH62I0-S1

■

2 inputs for CPH62I0-S2

Transducer compatibility Compatible with model CPT62I0 reference pressure transducers

Connection to CPH62I0 6-pin, shielded mini DIN female connector with interlocking

Transducer connection cable Standard: Cable with 6-pin mini DIN connector and 7-pin bayonet connector, length 3.3 ft (1.1 m)

Option: Extension cable, length 12.5 ft (3.8 m) overall cable length approx.16.4 ft (5 m)

Indication

Display Large 4 1/2-digit LC display for indication of two pressure values and additional information

Indication range -19999 ... 19999 digits (dependent upon connected reference pressure transducer)

Pressure types Dependent upon connected reference pressure transducer

■

Gauge pressure, absolute pressure or vacuum

■

Dierential pressure measurement only with CPH62I0-S2, and two model CPT62I0 reference

pressure transducers connected

Pressure units Freely selectable depending on the measuring range

■

bar

■

mbar

■

psi

■

kPa

■

MPa

■

mmHg

■

inHg

Functions

Measuring rate Measuring rate (can be set via menu)

■

4/s (“Slo” - slow measurement)

■

1,000/s ltered (“Fast” - fast measurement)

■

> 1,000/s unltered (“P.det” - peak value detection)

Mean value lter 1 ... 120 seconds (can be set via menu)

Data logger

■

Individual value logger

⇒

Up to 99 recordings incl. time can be accessed via function button

■

Cyclic logger

⇒

automatic recording of up to 10,000 values incl. time

⇒

Cycle time freely adjustable in the range from 1 ... 3,600 seconds

Real-time clock for data logger, (can be set via menu)

Min./Max. memory Minimum or maximum measured value (can be accessed via function button)

Hold Holding the last measured value (can be accessed via function button)

Ta re Tare or zero point correction (can be accessed via function button)

Alarm Alarm function (can be set via menu)

⇒

Min./Max. alarm (audible/visual)

Sea level (barometric pressure) Sea level adjustment -200 ... +9999 m (can be set via menu)

Power-o function Automatic switch-o (can be set via menu)

■

activated (1 ... 120 minutes)

■

deactivated (no automatic switch-o of the instrument)

Complete test and service cases

For maintenance and service applications, various case

systems are available. These include service cases with or

without pressure generation, battery, connection adapter, etc.

Certied accuracy

For each reference pressure transducer, the accuracy for the

complete measuring chain is certied by a factory calibration

certicate which accompanies the instrument. On request,

we can provide a DKD/DAkkS calibration certicate for this

instrument.