© Semiconductor Components Industries, LLC, 2018
July, 2018 − Rev. 7
1 Publication Order Number:
NCS210R/D
NCS210R, NCV210R,
NCS211R, NCV211R,
NCS213R, NCV213R,
NCS214R, NCV214R
Current-Shunt Monitors,
Voltage Output,
Bidirectional Zero-Drift,
Low- or High-Side Current
Sensing
The NCS210R, NCS211R, NCS213R and NCS214R are voltage
output, current shunt monitors (also called current sense amplifiers)
which can measure voltage across shunts at common−mode voltages
from −0.3 V to 26 V, independent of supply voltage. The low offset of
the zero−drift architecture enables current sensing across the shunt
with maximum voltage drop as low as 10 mV full−scale. These
devices can operate from a single +2.2 V to +26 V power supply,
drawing a maximum of 80 mA of supply current, and are specified over
the extended operating temperature range (–40°C to +125°C).
Available in the SC70−6 and UQFN10 packages.
Features
• Wide Common Mode Input Range: −0.3 V to 26 V
• Supply Voltage Range: 2.2 V to 26 V
• Low Offset Voltage: ±35 mV max
• Low Offset Drift: 0.5 mV/°C
• Low Gain Error: 1% max
• Low Gain Error Drift: 10 ppm/°C max
• Rail−to−Rail Output Capability
• Low Current Consumption: 40 mA typ, 80 mA max
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site Qualified and PPAP Capable
Typical Applications
• Current Sensing (High−Side/Low−Side)
• Automotive
• Telecom
• Power Management
• Battery Charging and Discharging
www.onsemi.com
See detailed ordering, marking and shipping information on
page 2 of this data sheet.
ORDERING INFORMATION
XXX = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
XXMG
G
UQFN10
MU SUFFIX
CASE 488AT
MARKING DIAGRAM
PIN CONNECTIONS
*NC denotes no internal connection. These pins can
be left floating or connected to any voltage between
V
S
and GND.
IN−
IN−
IN+
REF
GND
OUT
*NC
Vs
*NC
IN+
SC70−6
SQ SUFFIX
CASE 419B
1
XXXMG
G
1
6
REF
GND
Vs
OUT
IN−
IN+
(Top Views)
1
1
1
NCS210R, NCV210R, NCS211R, NCV211R, NCS213R, NCV213R, NCS214R, NCV214R
www.onsemi.com
2
R4
R2
-
+
R3
R1
NCS21xR
REF
OUT
IN-
IN+
GND
V
S
R
SHUNT
Supply
Load
0.01 uF
To
0.1 uF
Reference
Voltage
+2.2 V to +26 V
Output
V
OUT
+
ǒ
I
LOAD
R
SHUNT
Ǔ
GAIN ) V
REF
Figure 1. Example Application Schematic of High−Side Current Sensing
ORDERING INFORMATION
Device Gain R3 and R4 R1 and R2 Marking Package Shipping
†
NCS210RSQT2G 200
5 kW 1 MW
AVY SC70−6 3000 / Tape and Reel
NCV210RSQT2G* 200
5 kW 1 MW
AVY SC70−6 3000 / Tape and Reel
NCS210RMUTAG 200
5 kW 1 MW
CP UQFN10 3000 / Tape and Reel
NCS211RSQT2G 500
2 kW 1 MW
AVZ SC70−6 3000 / Tape and Reel
NCV211RSQT2G* 500
2 kW 1 MW
AVZ SC70−6 3000 / Tape and Reel
NCS213RSQT2G 50
20 kW 1 MW
AV3 SC70−6 3000 / Tape and Reel
NCV213RSQT2G* 50
20 kW 1 MW
AV3 SC70−6 3000 / Tape and Reel
NCS214RSQT2G 100
10 kW 1 MW
AV4 SC70−6 3000 / Tape and Reel
NCV214RSQT2G* 100
10 kW 1 MW
AV4 SC70−6 3000 / Tape and Reel
NCS214RMUTAG 100
10 kW 1 MW
CR UQFN10 3000 / Tape and Reel
NCS211RMUTAG 500
2 kW 1 MW
CM UQFN10 3000 / Tape and Reel
NCS213RMUTAG 50
20 kW 1 MW
CQ UQFN10 3000 / Tape and Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.