Industrial Ethernet Solutions
1
www.moxa.com
IKS-6728-8PoE Series
Introduction
The Moxa IKS-6728-8PoE series of Gigabit modular managed PoE+
Ethernet switches are designed to meet the demands of mission
critical applications for business and industry. The IKS-6728-8PoE
comes standard with up to 24 10/100BaseT(X), or PoE/PoE+, and 4
combo Gigabit Ethernet ports. The IKS-6728-8PoE Ethernet switches
provide up to 30 watts of power per PoE+ port in standard mode,
and also support high power output of up to 36 watts for heavy-duty
industrial PoE devices, such as weather-proof IP surveillance cameras
with wipers/heaters, high-performance wireless access points, and
rugged IP phones. IKS-6728-8PoE Ethernet switches support two
• Advanced PoE management functions: PoE output setting, PD
failure check, PoE scheduling, and PoE diagnostics
• Command Line Interface (CLI) for quickly configuring major
managed functions
• IEEE 1588 PTP V2 (Precision Time Protocol) for precise time
synchronization of networks
• DHCP Option 82 for IP address assignment with different policies
• Support EtherNet/IP and Modbus/TCP protocols for device
management and monitoring
• Compatible with EtherNet/IP and PROFINET protocols for
transparent data transmission
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
• IGMP snooping and GMRP for filtering multicast traffic
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning
24+4G-port Gigabit modular managed PoE+ Ethernet switches
types of power input sources: 48VDC for PoE+ ports and system
power, and 110/220 VAC for system power. These Ethernet switches
also support a variety of management functions, including STP/RSTP,
TurboRing, Turbo Chain, PoE power management, PoE device auto-
checking, PoE power scheduling, PoE diagnostic, IGMP, VLAN, QoS,
RMON, bandwidth management, and port mirroring. The IKS-6728-
8PoE series is designed especially for harsh outdoor applications with
3KV surge protection to ensure the uninterrupted reliability of PoE
systems.
• QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
• IEEE 802.3ad, LACP for optimum bandwidth utilization
• TACACS+, IEEE 802.1X, SNMPv3, HTTPS, and SSH to enhance
network security
• SNMPv1/v2c/v3 for different levels of network management
• RMON for efficient network monitoring and proactive capability
• Bandwidth management prevents unpredictable network status
with “Lock port” to restrict access to authorized MAC addresses
• Port mirroring for online debugging
• Automatic warning by exception through email, relay output
• Automatic recovery of connected device’s IP addresses
• Line-swap fast recovery
• Configurable by web browser, Telnet/serial console, CLI, Windows
utility, and ABC-02-USB-T automatic backup configurator
Features and Benefits
› 8 built-in PoE+ ports compliant with IEEE 802.3af/at
› Up to 36 W output per PoE+ port
› 3 KV LAN surge protection for extreme outdoor environments
› PoE diagnostics for powered-device mode analysis
› 4 Gigabit combo ports for high bandwidth communication
› -40 to 75°C operating temperature range at 720 W full loading
Industrial Ethernet Solutions
2
www.moxa.com
Modular Rackmount Ethernet Switch System,
IKS-6728-8PoE series
Specifications
IKS-6728-8PoE-4GTXSFP-HV-T
IKS-6728-8PoE-4GTXSFP-HV-HV-T
IKS-6728-8PoE-4GTXSFP-48-T
IKS-6728-8PoE-4GTXSFP-48-48-T
Technology
Standards:
IEEE 802.3af/at for PoE/PoE+ output
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMP v1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS,
Telnet, SSH, Syslog, DHCP Option 66/67/82, EtherNet/IP, Modbus/
TCP, LLDP, IEEE 1588 PTP V2, IPv6, NTP Server/Client
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge
MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 16 K
Packet Buffer Size: 12 Mbit
Jumbo Frame Size: 9.6 KB
Interface
Fast Ethernet: 8-port 10/100BaseT(X) or PoE+ 10/100BaseT(X) 2
modular slots for any 8-, or 6-port Interface Modules with
10/100BaseT(X), 100BaseFX (SC/ST connector), 100Base SFP, or
PoE+ 10/100BaseT(X)
Note: See below for IM-6700 Fast Ethernet module and PoE+ module product
information
Gigabit Ethernet: 4-port 10/100/1000BaseT(X) or 100/1000Base SFP
Console Port: USB-serial console (Type B connector)
Storage Port: USB 2.0 (Type A connector for ABC-02-USB-T)
System LED Indicators: PWR1, PWR2, EPS1, EPS2, STATE, FAULT,
MSTR/HEAD, CPLR/TAIL
Alarm Contact: 1 relay output with current carrying capacity of 3 A @
30 VDC
Power Requirements
Input Voltage:
HV models:
•110/220VAC(85to264VAC)forswitchsystem
•48VDC(46to57VDC)forPoEsystem(53~57VDCisrecommended
for PoE+ devices)
48 VDC models:
•48VDC(46~57VDC)forswitchandPoEsystem
Input Current:
HV models:
•PWRinputcurrent(switchsystem):
Max. 0.33 A @ 110 VAC
Max. 0.24 A @ 230 VAC
•EPSinputcurrent(PoEsystem):
Max. 0.29 A @ 48 VDC (excluding power consumption of PoE
devices)
48 VDC models:
- PWR/EPS input current (switch and PoE systems):
Max. 0.53 A @ 48 VDC (excluding power consumption of PoE
devices)
Overload Current Protection: Present
Reverse Polarity Protection: Present
Physical Characteristics
Housing: IP30 protection
Dimensions: 440 x 44 x 280 mm (17.32 x 1.37 x 11.02 in)
Weight: IKS-6728-8PoE-4GTXSFP-HV-HV-T: 4250 g
IKS-6728-8PoE-4GTXSFP-HV-T: 4150 g
IKS-6728-8PoE-4GTXSFP-48-48-T: 4250 g
IKS-6728-8PoE-4GTXSFP-48-T: 4150 g
Installation: 19’’ rack mounting
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8, EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time: 214,975 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty