REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED
A
Make corrections to figure 2 terminal connect i ons. Pin 10, delete TMODE and
replace with PG. Pin 11, delete GND and replace with TMODE. - ro
13-10-09 C. SAFFLE
REV
SHEET
REV A A A A A A A A A A A A A
SHEET 15 16 17 18 19 20 21 22 23 24 25 26 27
REV STATUS REV A A A A A A A A A A A A A A
OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14
PMIC N/A PREPARED BY
RICK O FF ICER
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
RAJESH PITHADIA
APPRO V ED BY
CHARLES F. SAFFLE
MICROCIRCUIT,LINEAR, 1.5 A, LOW DROPOUT
REGULATOR, MONOLITHIC SILICON
DRAWING APPROVAL DATE
13-07-11
AMSC N/A
REVISION LEVEL
A
SIZE
A
CAGE CODE
67268
5962-13220
SHEET 1 OF 27
DSCC FORM 2233
APR 97 5962-E001-14
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-13220
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
A
SHEET
2
DSCC FORM 2234
APR 97
1. SCOPE
1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device class Q) and
space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or
Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.
1.2 PIN. The PIN is as shown in the following example:
5962
R
13220
01
V
X
C
Federal
stock class
designator
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Device
class
designator
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
\ /
(see 1.2.3)
\/
Drawing number
1.2.1 RHA des ign ator . Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are
marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
1.2.2 Dev ice ty pe(s). The device type(s) identify the circuit function as follows:
Device type Generic number Circuit function
01 ISL75052 1.5 amp, low dropout regulator
1.2.3 Dev ice cl as s designator. The device class designator is a single letter identifying the product assurance level as
follows:
Devi ce class Device req uire me nts doc ume n tatio n
Q or V Certification and qualification to MIL-PRF-38535
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
X See figure 1 16 Ceramic metal seal flat pack
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V.