1
www.moxa.com
info@moxa.com
IP Surveillance
VPort 26 Series
IP66 day-and-night vandal-proof fixed dome IP cameras for outdoors
The VPort 26 series is a vandal-proof, IP66-rated, fixed dome IP
camera desinged for outdoor use. With SVGA (max. 800 x 600 )
resolution, H.264/MJPEG 3 simutaneous video streams, and day-and-
Introduction
Specifications
› -40 to 50°C operating temperature; no heater or fan required
› Maximum 800 x 600 (SVGA) resolution at 30 FPS
› High quality video image with 3D-DNR, BLC, and WDR
› 2.8 to 11 mm day-and-night vari-focal lens with a built-in
removeable IR-cut filter (ICR)
› Up to 0.01 lux illumination performance for color images
› DynaStream™ supported for optimized network efficiency
› ONVIF comformity for standardization and interoperability
› 802.1X, HTTPS, and SSH supported for advanced network security
Rugged Hardware Design
High Video Performance and Network Security
Good Video Quality
Camera
Sensor: 1/3” SVGA progressive scan CMOS
Lens:
• Focal length= 2.8 to 11 mm
• Wide-end: F=1.4, Diagonal 125.2°, horizontal 97.1°, vertical 71.1°
• Tele-end: F=2.8, diagonal 31.6°, horizontal 25.3°, vertical 19.0°
Auto Iris Type: DC drive
Camera Angle:
Pan: ±175°; Tilt: 0 to 85°; Rotation: ±180°
Minimum illumination (low light sensitvity): 0.01 lux, F=1.2
Synchronization: Internal
Gamma Correction: 0.45
White Balance: ATW/AWB (range: 3200 to 10000°K)
S/N Ratio: 52dB (TYP) (Gamma, Aperture, AGC Off; 3D-DNR On)
ICR Control: Auto
DNR: Built-in 3D-DNR (3D digital noise reduction)
WDR: 94 dB, Level 1 to Level 9
De-mist: Off, low, medium, high
AGC Control: Level 1 to Level 9
Backlight Compensation: On/off with selectable areas
Digital Zoom: 4X
Auto Light Control: Level 1 to Level 8
Image Rotation: Flip, Mirror, and 180° rotation
Image Setting: Manual tuning with saturation and sharpness
To enhance video image quality, the VPort 26 series is equipped with a
2.8 to 11 mm vari-focal lens that meets any viewing angle and distance
requirements. With the built-in removeable IR-cut filter, and automatic
switching from color to B/W images, the VPort 26 series is suitable for
The VPort 26 series is specially designed for outdoor applications with
the following features: IP66 rain and dust protection, high EMI/surge
protection, -40 to 50°C operating temperature without a fan or heater
required, metal housing, and vandal-proof dome cover. In addition, the
The VPort 26 series is designed to provide both H.264 and MJPEG
video streams and transmit up to 3 independent video streams (H.264
x 2, MJPEG x 1) simultaneously. The camera can encode and transmit
up to 30 FPS for each of the H.264 and MJPEG streams. Advanced
night camera lens, the VPort 26 series is well-suited for outdoor video
surveillance applications.
day-and-night use. Along with the 3D-DNR (3D Digital Noise Reduc-
tion) function, which greatly reduce the noise from video frames,
and WDR (Wide Dynamic Range), the VPort 26 series provides clear
images under back light circumstances.
camera is housed in a dehumidified membrane for spreading out the
moisture inside the camera. You may choose either the PoE (Power
over Ethernet, 802.3af) model, or a wire power input models with
either 12/24 VDC or 24 VAC.
network security functions, such as 802.1x and SSH, are also provided
to prevent unauthorized access or data hijacking, which is critical for
most surveillance applications.
2
www.moxa.com
info@moxa.com
IP Surveillance
Dimensions
Unit: mm (inch)
68 (2.68)
119.52 (4.71)
Ø144.88 (5.7)
152.2 (5.99)
Ø106.96 (4.21)
Ø135
(Ø5.31)
90°
45°
60 (2.36)
40 (1.57)
M25x1.5
Top View Side View
Video
Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video Outputs: Via Ethernet
Video Streams: Maximum of 3 video streams (2 x H.264, 1 x MJPEG)
Video Resolution and FPS (frames per second):
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF
176 x 112 30 176 x 144 25
CIF
352 x 240 30 352 x 288 25
VGA
640 x 480 30 640 x 480 25
4CIF
704 x 480 30 704 x 576 25
Full D1
720 x 480 30 720 x 576 25
SVGA
800 x 600 30 800 x 600 25
Video Viewing:
• DynaStream™ supported for changing the video frame rate
automatically
• 8 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 10 simultaneous unicast connections
PTZ: Digital PTZ with 4X zoom
Audio Inputs: 1 line-in or mic-in with 2-pin terminal block connector
Audio Outputs: 1 line-out with 2-pin terminal block connector
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS,
Modbus/TCP, 802.1X, SSH, HTTPS
Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector
GPIO
Digital Inputs: 1, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Output: 1, max. 24 VDC @ 1A
LED Indicators
STAT: Indicates if the system is booted properly or not
Network: 10 Mbps or 100 Mbps
Power: Power on/off
DIP Switch: To turn the LED light on/off
Local Storage
SD Socket: Standard SD socket (SDHC)
Power Requirements
Power Input:
• VPort 26: 1, 12/24 VDC or 24 VAC
• VPort P26: Power-over-Ethernet (IEEE 802.3af)
Power Consumption: Max. 11.7 W
Physical Characteristics
Housing: Metal, IP66 rated for rain and dust protection
Dimensions: 149 mm (diameter) x 120 mm (height)
Installation: Surface mounting, or outdoor mounting with accessories
Security
Password: User level password protection
Filtering: By IP address
Authentication: 802.1X
Encryption: HTTPS, SSH
Alarms
Intelligent Video: Camera tamper (Pending)
Video Motion Detection: Includes sensitivity settings
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP as event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting
customized alarm actions
Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
Environmental Limits
Operating Temperature: -40 to 50°C (-40 to 122°F )
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1
EMI: FCC Part 15, CISPR (EN 55022) class A
EMS:
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC60068-2-27
Freefall: IEC60068-2-32
Vibration: IEC60068-2-6
Vandal Resistance: EN 62262, IK10 level
Note: Please check Moxa’s website for the most up-to-date certication status.
Warranty
Warranty Period: 3 years
Details: See www.moxa.com/warranty
Minimum Viewing System Requirements
CPU: Pentium 4, 2.4 GHz
Memory: 512 MB of memory
OS: Windows XP/2000 with SP4 or above
Browser: Internet Explorer 6.x or above
Multimedia: DirectX 9.0c or above
Software Development Kit
VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API
library for customized applications or system integration for third-party
developers (the latest version of SDK is vailable for download from
Moxa’s website).
Standard: ONVIF