- 2 -

Overview

The EOM-104 Series Ethernet switch module provides an easy,

cost-effective, and integrated solution for device manufacturers to embed

an Ethernet switch module into an existing product for enhanced

performance and reliability.

The module supports 10/100 Mbps Fast Ethernet, and comes with Turbo

Ring’s fast recovery time of under 20 ms built in. The EOM-104 Series also

provides a rich set of peripherals (e.g., GPIO programming pins and DIP

switches to enable Turbo Ring) and is an ideal solution for embedded

Ethernet applications.

Package Checklist

The EOM-104 Series Evaluation Kit package contains the following items:

• EOM-104 series module

• EOM-104 series evaluation board

• Universal power adaptor

• 2 power cords

• Null modem serial cable

• Cross-over Ethernet cable

• Accessories pack

• Quick installation guide (printed)

• Warranty card

Note: Please notify your sales representative if any of the above items are

missing or damaged.

First-Time Installation and Configuration

Before installing the EOM-104 Series, please check to make sure that all

items in the Package Checklist are in the box.

Hardware Installation Procedure

Step 1: Plug the EOM-104 Series into the evaluation board.

Plug the EOM-104 Series module into the sockets on the top of the

evaluation board

Step 2: Connect the power source to the evaluation board.

Connect the 12 VDC power line to the evaluation board’s power jack.

Step 3: Connect the network cable to the evaluation board.

Use the RJ45 Ethernet cable to connect the Ethernet port on the

evaluation board to an Ethernet network for evaluation.

Step 4: Set up the computer’s IP address.

In a Windows environment, the IP address can be changed in the TCP/IP

Settings window. Select an IP address on the same subnet as the

EOM-104 Series. Since the default IP address of the EOM-104 is

192.168.127.253, and the subnet mask is 255.255.255.0, you should set

the IP address of the computer to 192.168.127.xxx.

Step 5: Configure the EOM-104 Series.

Please refer to EOM-104 Series User’s Manual.