PROPERTY
STANDARD DUROMETER
30 40
50
60 70 80
Specific Gravity, g/cc
ASTM D297
1.12
1.25 1.45
1.45 1.50
1.55
Durometer, Shore A
ASTM D2240 30 ± 5 40 ± 5 50 ± 5 60 ± 5 70 ± 5
80 ± 5
Tensile Strength, MPa (psi)
ASTM D412
4.14
(600)
Elongation, %
ASTM D412
500 400 300 300 275 275
Tear Strength, kN/m (ppi)
ASTM D624
Die B
10.5
(60)
14.0
(80)
Operating Temperature
Range,
°C (°F)
-62 to 232
(-80 to 450)
-62 to 232
(-80 to 450)
-62 to 232
(-80 to 450)
-62 to 232
(-80 to 450)
-62 to 232
(-80 to 450)
-62 to 232
(-80 to 450)
Intermittent Use Upper
Temperature, °C (°F)
260 (500)
260 (500)
260 (500) 260 (500)
260 (500)
260 (500)
STANDARD AVAILABLE RANGE
PRODUCT DIMENSIONS
Thickness Available mm, inches
See Reverse
0.254 to 25.4 (0.010 to 1.0)
Full Widths Available mm, inches
914 (36)
914 to 1905 (36 to 75)
Roll Lengths m, yards
See Reverse -
Colors Available
Red Red, White, Black, Gray, Brown, Green, Blue
Surface Finish
Matte Matte, Fabric, Super Fine, Heavy, Smooth
Surface Talc
Talc or Talc-free
-
*Thickness over 12.70 mm (0.5 inches
) only available as a molded product.
DSP Commercial Grade solid silicone is designed for
applications that require extreme temperature
resistance and general physical property performance.
Features & Benefits:
Excellent gasketing material
Extreme high & low temperature resistance
UV & ozone resistan
ce
Product Data Sheet
DSP Solid Silicone
Commercial Grade
The information contained in this Data Sheet is intended to assist you in designing with Rogers’ Elastomeric Material Solutions.
It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or
fitness for a particular purpose or that the results shown in this Data Sheet will be achieved by a user for a particular purpose.
The user should determine the suitability of Rogers DSP products for each application. The Rogers logo is a trademark of Rogers
Corporation or one of its subsidiaries. © 2019 Rogers Corporation. All rights reserved. 1019-PDF • Publication #185-001
PHYSICAL
TEST METHOD
• Non-toxic and chemically inert
• Formulated to meet UL94 HB classification
• Wide range of durometers, thickness and widths
4.14
(600)
4.14
(600)
4.14
(600)
4.48
(650)
4.48
(650)
14.0
(80)
14.0
(80)
14.0
(80)
14.0
(80)
Product Properties
Product Configuration
STANDARD
NOMINAL RANGE
TOLERANCE
STANDARD
0.38
(0.015)
0 - 1.0
(0 - 0.039)
± 0.180
( ± 0.007)
36.6
(40)
0.81
(0.032)
36.6
(40)
1.57
(0.062)
1.01 - 1.75
(0.04 - 0.069)
± 0.30
(± 0.012)
18.3
(20)
2.36
(0.093)
1.76 - 3.4
(0.07 - 0.134)
± 0.043
(± 0.017)
3.18
(0.125)
4.75
(0.187)
3.41 - 12.7
(0.135 - 0.500)
± 0.56
(± 0.022)
9.1
(10)
6.35
(0.250)
9.53
(0.375)
12.70
(0.500)
* In the case of laminated products, these tolerances apply only to the
individual layers and not the overall thickness of the laminate. Laminate
thicknesses are nominal.
• All metric conversions are approximate. Reference US customary units for official values and tolerances.
• Additional technical information and product specifications are available upon request.
• Typical values should not be used for specification limits.
VALUE ADDED OFFERINGS
• Acrylic adhesive (PSA) lamination
• Slit tapes/strippings
• Extra post cures
• Edge trimming
• Custom Colors
The information contained in this Data Sheet is intended to assist you in designing with Rogers’ Elastomeric Material Solutions.
It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness
for a particular purpose or that the results shown in this Data Sheet will be achieved by a user for a particular purpose. The user
should determine the suitability of Rogers DSP products for each application. The Rogers logo is a trademark of Rogers
Corporation or one of its subsidiaries. © 2019 Rogers Corporation. All rights reserved. 1019-PDF • Publication #185-001
THICKNESS
mm (inches)
ROLL LENGTH
m (yard)
Standard Thickness, Roll Lengths and Tolerances
Notes:
18.3
(20)
18.3
(20)
4.6
(5)
4.6
(5)
9.1
(10)
0 - 76
(0 - 3)
± 1.60
(± 0.063)
± 2.39
(± 0.094)
± 3.18
(± 0.125)
± 4.76
(± 0.188)
+ 25.4, - 0.0
(+ 1.0, - 0.0)
+ 25.4, - 0.0
(+ 1.0, - 0.0)
NOMINAL WIDTH
mm (inches)
TOLERANCE
mm (inches)
Slit Material and Tape (PSA) Width Tolerances
> 203 - 305
> 305 - 610
> 610 - 914
> 914
> 76 - 203
(> 36)
(> 3 - 8)
(> 8 - 12)
(> 12 - 24)
(> 24 - 36)