DL-RTS4463 FSK Wireless Transceiver Module
------------------------------------------------------------------------------------------------------------------------------------------------------------
ShenZhen Dreamlnk Technology Co., Ltd Tel: 86-755-29369047 E-mail: james@dreamlnk.com www.iot-rf.com
1
High-performance FSK Wireless Transceiver Module
SPECIFICATION
Model No.: DL-RTS4463
Version: V1.1
DL-RTS4463 FSK Wireless Transceiver Module
------------------------------------------------------------------------------------------------------------------------------------------------------------
ShenZhen Dreamlnk Technology Co., Ltd Tel: 86-755-29369047 E-mail: james@dreamlnk.com www.iot-rf.com
2
Before using this module, please read this document carefully, and pay attention to
the following important matters:
This module is an electrostatic sensitive product. Please operate it on an anti-static workbench during
installation and testing.
The module uses an external antenna by default. The antenna can be a wire antenna or a standard UHF
antenna. You can choose a specific antenna according to the actual situation. If the terminal product
uses a metal shell, be sure to install the antenna outside the metal shell. Otherwise, the RF signal will
be seriously attenuated, which will affect the effective distance.
Metal objects and wires should be kept away from the antenna as much as possible.
When installing the module, nearby objects should be kept at a sufficient safety distance from the
module to prevent short circuit damage.
This module should be used in a dry environment. Please do not make any liquid substance come into
this module.
Please use an independent voltage regulator circuit to supply power to this module, and avoid sharing
with other circuits. The tolerance of the power supply should not be less than 5%.
Limitations:
This module is intended to be embedded in the customer's terminal product application, and does not
provide a casing itself. It is not recommended that the customer directly resell this module as a final
product without permission.
This series of modules are in accordance with commonly used international standards. If there is any
special certification needed, we can adjust certain indicators according to your needs.
This module cannot be applied to life rescue, life-support systems, or any occasion where personal
injury or life threatening may cause by equipment failure. Any organization or individual carrying out
the above-mentioned applications shall bear all risks at their own.
We will not be responsible for any direct or indirect damage, injury or loss of profits caused by
products that use this module.