29
D
07.16
Dissipation factors at + 20) C: tan d
at f C0.1 mF 0.1 mF P C 1.0 mF
1 kHz 8 x 10
-3
8 x 10
-3
10 kHz 15 x 10
-3
15 x 10
-3
100 kHz 30 x 10
-3
–
Voltage derating:
A voltage derating factor of 1.25 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life 300 000 hours
Failure rate P 2 fit (0.5 x U
r
and 40) C)
Capacitance range:
3300 pF to 1.0 m F (E12-values on request)
Rated voltages:
63 VDC, 100 VDC, 250 VDC, 400 VDC
Capacitance tolerances:
± 20%, ± 10% (±5% available subject
to special enquiry)
Operating temperature range:
–55+ C to +100+ C
Test specifications:
In accordance with IEC 60384-2
Climatic test category:
55/100/21 in accordance with IEC
Insulation resistance at +20+ C:
U
r
U
test
C 0.33 mF 0.33 mF < C 1.0 mF)
63 VDC
50 V
3.75 x 10
3
M¸ 1250 sec (M¸ x mF)
(mean value: 1 x 10
4
M¸) (mean value: 3000 sec)
100 VDC
100 V
1 x 10
4
M¸
–
(mean value: 2 x 10
4
M¸)
Measuring time: 1 min.
Test voltage: 1.6 U
r
, 2 sec.
Maximum pulse rise time:
Capacitance Pulse rise time V/m sec
pF/mF max. operation/test
3300 ... 6800 100 / 1000
0.01 ... 0.022 50 / 500
0.033 ... 0.068 30 / 300
0.1 ... 0.33 20 / 200
0.47 ... 1.0 15 / 150
for pulses equal to the rated voltage
WIMA MKS 02
Metallized Polyester (PET) Capacitors in PCM 2.5 mm.
Capacitances from 3300 pF to 1.0
mF. Rated Voltages from 63 VDC to 400 VDC.
Special Features Electrical Data
˜ High volume/capacitance ratio
and reduced base
˜ PCM 2.5 mm
˜ Self-healing
˜ According to RoHS 2011/65/EU
Typical Applications
For general DC-applications e.g.
˜ By-pass
˜ Blocking
˜ Coupling and decoupling
˜ Timing
Construction
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Silver.
Epoxy resin seal: Yellow
Mechanical Tests
Pull test on pins:
10 N in direction of pins according to
IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec
2
in
accordance with IEC 60068-2-29
Packing
Available taped and reeled.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
30
Continuation
General Data
D
07.16
Capacitance
63 VDC/40 VAC * 100 VDC/63 VAC *
W H L PCM** Part number W H L PCM** Part number
0.01 mF 2.5 7 4.6 2.5 MKS0C021000B00_ _ _ _ 2.5 7 4.6 2.5 MKS0D021000B00_ _ _ _
0.015 „ 2.5 7 4.6 2.5 MKS0C021500B00_ _ _ _ 2.5 7 4.6 2.5 MKS0D021500B00_ _ _ _
0.022 „ 2.5 7 4.6 2.5 MKS0C022200B00_ _ _ _ 2.5 7 4.6 2.5 MKS0D022200B00_ _ _ _
0.033 „ 2.5 7 4.6 2.5 MKS0C023300B00_ _ _ _ 2.5 7 4.6 2.5 MKS0D023300B00_ _ _ _
0.047 „ 2.5 7 4.6 2.5 MKS0C024700B00_ _ _ _ 2.5 7 4.6 2.5 MKS0D024700B00_ _ _ _
0.068 „ 2.5 7 4.6 2.5 MKS0C026800B00_ _ _ _ 2.5 7 4.6 2.5 MKS0D026800B00_ _ _ _
0.1 mF 3 7.5 4.6 2.5 MKS0C031000C00_ _ _ _ 3 7.5 4.6 2.5 MKS0D031000C00_ _ _ _
0.15 „ 3 7.5 4.6 2.5 MKS0C031500C00_ _ _ _ 3.8 8.5 4.6 2.5 MKS0D031500D00_ _ _ _
0.22 „ 3 7.5 4.6 2.5 MKS0C032200C00_ _ _ _ 4.6 9 4.6 2.5 MKS0D032200E00_ _ _ _
0.33 „ 3.8 8.5 4.6 2.5 MKS0C033300D00_ _ _ _ 5.5 10 4.6 2.5 MKS0D033300F00_ _ _ _
0.47 „ 4.6 9 4.6 2.5 MKS0C034700E00_ _ _ _
0.68 „ 5.5 10 4.6 2.5 MKS0C036800F00_ _ _ _
1.0 mF 5.5 10 4.6 2.5 MKS0C041000F00_ _ _ _
Capacitance
250 VDC/160 VAC * 400 VDC/200 VAC *
W H L PCM** Part number W H L PCM** Part number
3300 pF 2.5 7 4.6 2.5 MKS0F013300B00_ _ _ _ 2.5 7 4.6 2.5 MKS0G013300B00_ _ _ _
4700 „ 2.5 7 4.6 2.5 MKS0F014700B00_ _ _ _ 2.5 7 4.6 2.5 MKS0G014700B00_ _ _ _
6800 „ 2.5 7 4.6 2.5 MKS0F016800B00_ _ _ _ 2.5 7 4.6 2.5 MKS0G016800B00_ _ _ _
0.01 mF 2.5 7 4.6 2.5 MKS0F021000B00_ _ _ _ 3 7.5 4.6 2.5 MKS0G021000C00_ _ _ _
0.015 „ 2.5 7 4.6 2.5 MKS0F021500B00_ _ _ _ 3.8 8.5 4.6 2.5 MKS0G021500D00_ _ _ _
0.022 „ 2.5 7 4.6 2.5 MKS0F022200B00_ _ _ _ 4.6 9 4.6 2.5 MKS0G022200E00_ _ _ _
0.033 „ 3 7.5 4.6 2.5 MKS0F023300C00_ _ _ _ 5.5 10 4.6 2.5 MKS0G023300F00_ _ _ _
0.047 „ 3.8 8.5 4.6 2.5 MKS0F024700D00_ _ _ _ 5.5 10 4.6 2.5 MKS0G024700F00_ _ _ _
0.068 „ 4.6 9 4.6 2.5 MKS0F026800E00_ _ _ _
0.1 mF 5.5 10 4.6 2.5 MKS0F031000F00_ _ _ _
* AC voltage: f = 50 Hz; 1.4 x U
rms
+ UDC U
r
New range and value
** PCM = Printed circuit module = pin spacing
Dims. in mm.
d = 0.4 l
2.5
PCM
at the pin exit point
s
(0.5)±
L
W
H
d
6
-2
Rights reserved to amend design data without prior notification.
Impedance change with frequency
(general guide).
WIMA MKS 02
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 145.
WIMA MKS 02